Job Openings
Submit Resume
Client Services

Candidate Profiles
Submit Job Order
Client Services

Career Portal
Interview Tips
Other Resources
Contact Us

Candidate Listing.

Thank you for taking the time to review the following partial listing of our candidates. As you review them, you'll want to learn more detailed information, and perhaps receive a resume.

To complete a request for more detail, check the box(es) next to the appropriate ID number(s), then fill in your contact information at the bottom of the page and click the Submit Request button. We'll contact you immediately upon receipt of your request.

ProTech2, inc., does not discriminate or recruit for companies that discriminate in employment based upon race, color, religion, sex, national origin, age, physical disability or marital status.

27034, PRODUCTION MANAGER:  BS in Business Administration. Manufacturing and production professional skilled in leading high-producing teams and using lean manufacturing to reduce costs and increase process efficiency. Boosted efficiency through technology upgrades and process improvements such as line balancing projects to reduce wasteful production inefficiencies from wasted assembly movements and stations. Actively suggested operational improvements to enhance quality, improve production times and reduce costs. Developed production tracking and quality control systems, analyzing production, quality control, maintenance and other operational reports, to detect production problems.

27039, SENIOR SUPPLIER DEVELOPMENT MANAGER:  MBA and BS in Business Management. Certified Lean Six Sigma Black Belt. Proven value creator responsible for working with key stakeholders to drive incremental end to end business, supply chain, and manufacturing process improvements throughout the supply base. These include: cash to cash cycle improvements ,supply chain response time improvements, total cost of ownership, lean production implementation, rough cut capacity planning, built in quality implementations, and supplier performance metric improvements (quality/shipping/collaborations).

27033, MOLD TECH/ PROCESSOR:  BS in Mechanical Engineering. Familiar with all aspects of the injection molding process including setup and teardown, troubleshooting and basic maintenance with these molding presses, Husky and Krauss Maffei, with tonnages from 80 to 800. Materials used include Nylon, PP, Acetal, HDPE, and PS. Capable of recommending measures to improve production such as scrap minimization, quality improvements, and equipment optimization. Produced documents for future productivity.

26990, C.N.C. MACHINE OPERATOR:  More than 12 years experience as machine operator, four years as an assistant supervisor, managing eight operators. Substantiated work experience supported by verifiable letters. Georgia Work Ready Certified. Certificate Level: Gold. Areas of strength include Extrusion operations, C.N.C. machining, industrial lift truck(s) operations, shipping and receiving operations, OSHA regulations and code compliant, materials management and control, perpetual inventory control and reporting, quality control and troubleshooting, documentation and record keeping

26992, TECHNICAL SUPPORT / DEVELOPMENT ENGINEER:  BS in Chemical Engineering and also has training in ACS Polymer Chemistry - Principals and Practices. Knowledgeable in various fillers and pigments in ETFE, FEP, PFA and ECTFE. Experienced with twin screw extruders as well as single screw extruders. Optimized products and processes. Assembled and designed screws for twin screw extruder. Experienced in both injection molding and compression molding parts for testing. Authored and revised safety data sheets. Responsible for generating written reports on findings and effectively communicating to my supervisors and plant managers, ensuring comprehension.

26983, DIRECTOR OF ENGINEERING:  BS in Mechanical Engineering also has MBA. Strong management background including human resource development and planning, with more than 25 years of experience supervision of up to 24 employees in design, fabrication, construction, installation, startup and checkout. Proven ability to innovate by developing 15 patented inventions, Creative designer of polymer systems for the Nonwovens Industry including melt-spinning, cast and blown film technologies. Subject matter expert for corporations on fiber production and plastic extrusion of all types. Trained staff members on best practices, operational protocol, and tactics to maximize performance and safety. Proficient in full project management life cycle, team leadership and development, resource allocation, budgeting, scoping, conflict resolution, client and vendor relationships, design and fabrication solutions, change management, process center-lining, continuous improvement process, data analysis, lean manufacturing and six sigma process control. Excellent communication skills with experience giving presentations to audiences of 300+. Extensive international experience.

26986, MAINTENANCE GROUP LEADER:  BS in Mechanical Engineering. Highly efficient focused and seasoned Maintenance and Engineering Manager with strong record of cost-effective engineering project completion. Adept at fostering and sustaining professional and productive business relationships across a variety of industries. Strongly knowledgeable in complex maintenance operations with oversight of large budgets and workforces. Thirty plus years of experience at all levels of Maintenance/Facilities management including front line supervision, planning and scheduling, craftsman supervision, and department management. Extensive knowledge in engineering principles and maintenance technology. Strong knowledge of relevant safety and quality control standards. High familiarity with financial analysis and forecasting principles. Sound skills in cost control and reduction strategies.

26997, PROJECT ENGINEER:  MS in Engineering Management and BS in Industrial and Management Systems Engineering. Certified Project Management Professional (PMP). Responsible for overall management of major capital equipment and facilities projects including handling technical investigations, justifications, equipment selection and specification, installation and startup. Lead plant and corporate teams in execution of projects. Track capital projects for the company’s capital program to ensure budges and timing objectives are met. Lean Product Development team member – overhaul project evaluation, selection, and management process for the division; responsible for global deployment of new process. Certified in Lean Manufacturing. Six Sigma Green Belt. Proficient in written and conversational Spanish

26987, SR. PACKAGING ENGINEER/PROGRAM MANAGER:  BS in Chemical Engineering and Env. Haz. Mat. Mng. Skills include quality, process control, management, planning and managing multiple projects, packaging, design development, brainstorming and innovation, cost saving initiatives, process improvements, account management, training, budgeting and scoping projects, holding to budget, injection molding, blow molding, research and development, production, attention to detail, team work, trouble shooting, process planning, team building, employee development, customer relationship building and management, learn quickly, decision making, business planning, organizing, running meetings, Microsoft office

26921, FOCUS FACTORY MANAGER:  MBA and BS in Electrical Engineering. Skills in Manufacturing, ISO, Operations and SIX-SIGMA. Lead a team of 100 employees across three shifts including the operation of 20 Injection Molding machines. Core competencies include: Plant Operations, Quality Improvement, Six Sigma, Customer Focus, ISO, P&L Management, Business Acumen, Lean Manufacturing, Employee Relations, 5S, Visual Factory, Regulatory Compliance, Project Management, Strategic Planning, Performance Management, Safety, Problem Resolution and Corrective Action.

26924, FIRST SHIFT FACILITATOR:  15 years leadership/supervisory experience with 8+ years in lean manufacturing/waste reduction implementation. 8+ years experience in direct sales. Skilled in statistical analysis, time studies, efficiency, proofing, planning and training. Excellent computer skills, especially with Excel, Word, Publisher and PowerPoint. Very diverse work background, quick learner and flexible to change. Talented in regards to public speaking. Excellent at building relationships with customers and with people in all departments of an organization at multiple facilities

26958, AUTOMATION COORDINATOR:  BS in Electrical Engineering; AS in Electricity; certificates in Control Systems Technology; Robot Mechanics and Electrical Automation Technology. Trained to maintain a large variety of automated machinery ranging from grinders, welders, servos, drives, motor starters, A/C motors, D/C motors, motor generator sets and robots. Use electrical and mechanical troubleshooting skills to keep machinery productive. Knowledgeable with various PAC’s, PLC’s, Ladder Logic Diagrams, wiring schematics, and wiring diagrams. System knowledge includes: Kcwin, RSLinx, RSLogix500, RSLogix5000, ControlLogix, CompactLogix, DeviceNet, ControlNet, Ethernet IP, Honeywell HC900, AutoCAD, Kawasaki Robotics and Fanuc Robotics.

26954, PACKAGING ENGINEER:  BS in Packaging. Working knowledge of Photoshop, AutoCAD, ArtiosCAD, SolidWorks, CAPE, and TOPPS. Accountable for the validations of packaging machinery; specifically tray and pouch sealers. Knowledgeable in testing and inspecting various packaging to ensure sterility is not compromised; bubble, seal, creep and burst test. Teamwork and leadership are an essential part of the daily job. Knowledge in some of the more technical aspects of packaging; set up heat tunnels; knowledge of how to set up laser sensors (add & reducing delay); and work with labelers and gluers

26961, TOOL ROOM MACHINIST:  Diploma in Manufacturing Technologies and AS in Mechanical Engineering. Enthusiastic machinist with over 5 years of hands-on experience in numerous departments. Striving to learn and grow to become an engineer. Excels at designing new processes, ranging from fixtures, programming, and assemblies. Self-starter and can quickly pick-up on new concepts. Ability to do hands-on training with new machinists on conversational programming.

26868, PACKAGING ENGINEER - MODULE LEAD:  Ph.D in Packaging. Polymer Processing experience includes: Extruder; Parr Reactor, DSM Mini-Extruder, Injection Molding , and Compression Molding. Detailed knowledge and exposure to testing packages and packaging material according to ASTM and ISTA Standards; Project Management with supporting production and manufacturing in the resolution of the packaging issues during implementation of new products. Experience reviewing, investigating and resolving packaging materials for cost reductions and performance efficiencies; developing structural and protective packaging components for secondary, tertiary and bulk packaging. Direct experience analyzing and providing data from packaging departments for establishing companywide Product Lifecycle Management (PLM), and working with various co-manufacturing facilities to improve incoming packaging components quality by recommending different packaging designs and materials.

26871, WAREHOUSE / INVENTORY CONTROL MANAGER:  BS in Industrial Technology, Minor in Inventory Control. Working on MBA with Minor in Finance. Over fifteen years of experience in Materials Management, Operations Management, Production Planning, Capacity Planning, Demand Planning and Engineering. Excellent interaction with internal and external customers, engineering, sales, and manufacturing. Display self-discipline and respect at all levels. Enjoy working with people. A team player always looking for a challenging role. Skills include: Purchasing ,SAP, Microsoft Office, Production Control, MRP, Windows 95, Quality Control, SMS, Windows 3.1, Inventory Control, IMS, Windows NT, Material Control, FTSP, Lotus Notes, Lean MFG concepts , Visual System, Demand Pull, Demand Push, JIT, 5S, Spars 2000, SPCC 11.5 for windows, Siebel System, IBM AS400, I2 Trade Matrix Demand Planning, SCOP, TCOPTELE 2, Oracle, SYMIX.

26873, SUPPLY CHAIN MANAGER:  MS in Management. BS in Organizational Studies. Goal-oriented manager with 30 years of experience with a Fortune 500 company in various Supply Chain capacities. Strong skills in production planning, cost reduction projects, employee training, and internal/external customer service. Extensive experience in team development, project management and implementation, and process flow. Strengths include solid communication and problem-solving skills and adapting to change. Skilled in ERP Implementation, Employee Training & Development, Cost Reduction Projects, S&OP Management, Kosher, USDA, FDA, Increasing Customer Satisfaction.

26833, PRODUCTION MANAGER / WAREHOUSE MANAGER (INTERIM PLANT MANAGER):  BA in Business Administration. Solutions oriented Manufacturing Executive with expertise in manufacturing - engineered parts and machinery fabrication, plastic parts production. Experienced in operation management, manufacturing engineering, production planning, supervisory and technical staffing, team building, performance appraisals, ISO 9001-14001, problem solving for production optimization, Lean Manufacturing concepts (6S, CI, Kaizen), warehousing / logistics, inventory and materials control. Experience includes plastic injection / blow molding and tooling, custom machine design and building, production machine shop, methods engineering, tool & die building, plant maintenance and capital equipment procurement, quality systems, warehouse, materials and inventory management, skills assessment, training design, production efficiency. Successful project management of the entire production cycle including customer requirements, product design, tooling development, production start-up, debugging, full production, packaging, warehousing and delivery.

26852, SR. OPERATIONS MANAGER:  BS in Integrated Studies/ Supply Chain Logistics Specialization. Project Management Certification, CPM. Lean Six Sigma Green Belt Certification. Oversee operational business and performance of regional locations. Direct, plan, implement and measure process improvement strategy - on Demand & Distribution. Improve efficiencies of warehouse operations and customer performance metrics. Measure, evaluate, improve distribution operation. Develop, hire, train site Operations Managers and location staff. Communicate, oversee and implement corporate processes. Collaborate with Sales, HR, Quality and Compliance departments. Develop and nurture independent contractor, vendor relationships. Negotiate rates with independent contractors and customers.

26850, LOGISTICS/MATERIALS MANAGER:  BS in Business Management. Lean Manufacturing Certification. Experience in leading continuous improvement activities within my department and throughout the plant. Trained in the operation of many different types of factory machines. Able to handle a wide variety of tasks without supervision. Detail oriented who enjoys working as a team player. Able to handle the responsibility of a supervisory position. 19 + years of SAP experience using MRP controls and S&D, including cycle counts, creating and receiving Purchase Orders, creating and maintaining scheduling agreements, creating and issuing deliveries, receiving activities, running various inventory and customer reports. 15 + years working with freight forwarders, logistics companies, and expeditors in many different facets of the transportation industry, including domestic and international freight.

26841, LEAD PROCESS TECH:  Twelve years machining experience and assembly. Equipment includes Nissei, GEM, Sidel and Graham Wheels. Experience in a fast pace environment. Ability to report defective materials or questionable conditions to the department supervisor. Experience in milling, turning, drilling, taping, de-burring, molding and all bench operations and inspect. Experience in acceptance in receiving frequent supervision and assistance with regard to machine set up. Able to read and interpret drawings and blueprints, follow routers, use simple math, and use basic hand held measuring tools. Able to work in a team environment in a professional setting to help improve company standards. PC knowledge of Microsoft Office including Excel, Word, Outlook and Access. Experience with welding, hydraulics and general electrical schematics as well as troubleshooting and general maintenance of equipment.

26839, STAFF COMPLIANCE ENGINEER:  BS in Industrial Engineering (BSIE), An accomplished, results-oriented and an innovative professional manager with a comprehensive background as an inventor. Technical daedal knowledge to process Cradle to Grave design applications. Proven expertise in New Product Development (NPD) and systems integration required for surgical equipment. Possesses strong leadership & mentoring abilities in leading cross-functional teams through the “Stage-Gate” development process while maintaining compliance from the initial design concept through product launch. Consistently recognized, by peers, as a Subject Matter Expert (SME) in areas such as: fluid dynamics, vacuum design, HMI integration, electrical safety, industrial product design and automated process manufacturing. An experienced engineer in design validation, compliance testing, EMC/EMI design and assessment of applicable standards including hospital credentialed access.

26831, MAINTENANCE TECH / MOLD CHANGER:  Course work in Mechanical Engineering Technology, OSHA Safety; Technical Math; Machining Processes; CNC Programming & Machining. Skills include: Operating Lathe, Mill, Manual and CNC, Machine Controls, MasterCAM, Auto CAD, PLC Programming/Troubleshooting, Blueprints, Technical Sketching, Metallurgy, Measuring with Micrometers, Calipers, Strong Technical Math Skills, Electrical Maintenance, Electrical Safety, Microprocessor Applications, Word, PowerPoint, Outlook, Strong Computer skills.

26808, HARDWARE/SOFTWARE QUALITY TEST TECHNICIAN:  BS in Technical Management. 10+ years of project management/supervisory experienced. 8 years blow molding, injection molding and extrusion experience. 10 + years performing installation, programming, calibrating and servicing of Electro-Mechanical equipment. Strong troubleshooting, analytical and problems solving skills in providing customer support. Excellent consultative customer service skills, able to provide training and coaching. Able to communicate effectively with all levels of management and staff. A self-starter and a definite leader with focused vision.

26807, PRODUCTION SUPERVISOR:  BS in Materials Handling and Quality Production. Developed, implemented, and managed ISO compliant quality processes to assure product traceability and raw material compliance. Made sure that the finished products meet or exceed our customers' expectations. Troubleshot internal and external quality/processing issues. Managed up to 10 lines and 50 to 100 employees using various packaging equipment.

26780, SUPERVISOR BLOW MOLD AND INJECTION DEPARTMENT:  Supervision, training and coaching of employees in blow mold/injection environment. 12+ years supervisory skills. 20+ years manufacturing/production. Project management skills and problem solving skills, Uniloy R2000 blow mold operator, Husky Hycap injection operator, machine operator, overhead crane operator, material handling. Experience with Microsoft Word, Excel and Access. Time management/multi-tasking skills.

26803, Journeyman Millwright / Foreman / Lead man:  Certificates/Licenses: Millwright foreman / lead man; LOTO procedures ( power down and start up ), OSHA safety regulations, confined space certified, safety retrieval, safety operations,. Rigging , proper hand signals to operator. Proper shutdown and startup procedures. Has been responsible for pulling heat exchangers, rebuilding gear boxes, laser alignment of electric motors and pump milling machines, and other plant equipment. Install, program and setup hydraulic, pneumatic and electric product movement systems including installation of robotics. Run, connect and test electrical power systems. At times function as a project management individual. Skills used include welding (mig, tig, arc), heavy equipment operation, up to 480 3-phase motors, bend thread and install conduit, proper shutdown and startup procedures, rebuilding and/or replacement of conveyor belts and buckets as well as drive systems.

26802, STRATEGIC UNIT MANAGER EXTRUSION AND RESIN RECYCLE:  BS in Business Management. Accomplished management professional with 21 years of manufacturing experience in a lean manufacturing environment. Proven leadership skills, exceptional interpersonal skills, flexibility, and teamwork skills to achieve business objectives. Effective oral and written communication. Has worked with foam extrusion, reclaim extrusion, recycling and thermoforming.

26799, QUALITY ASSURANCE ENGINEER:  BS in Manufacturing Operations. Member of SME. Self-motivated professional with experience in quality and manufacturing engineering. Emphasis on evaluating existing processes for performance capability to improve efficiency. Expert at analyzing gaps in the process to implement new processes for continuous improvement. A results driven leader and mentor, capable of working independently or part of a team. Also has BRC audit experience in the food and beverage industry. Taught/Coordinated Defect Recognition Training. Created Certificates of Analysis, Validated testing equipment. Managed gage calibration

26745, SENIOR MANAGER PLANNING:  BA in Organizational Management. 22 plus years being responsible for as many as 24 direct reports and for all supply chain management activities and oversight including materials management, production and capacity planning, scheduling, inventory, purchasing and warehousing. Oversaw negotiations and award all fixed-price and incentive contracts. Performed oversight on all contracts for vendor performance and deliverables. Participated in budget preparation and administration, monitors and controls expenditures. Oversee the design, implementation and maintenance of a scheduling system / process to support maintenance, development and production activities.

26792, QUALITY & CONTINUOUS IMPROVEMENT MANAGER:  MS in Quality Assurance via IET. Proven ability to work in a broad range of environments, cultural settings, and industries. Multi-plant/site experience. Experience managing geographically dispersed teams. Broad Quality System and regulatory experience; ISO 9000, TS 16949, cGMP, FDA, AIB, and Consumer Products. Broad experience in New Product Development, domestic and international supplier management/development. Equally effective leading or working as a member of a team. Able to perform in high pace environments. Skilled public speaker. Comfortable either in corporate or shop floor settings. Lifelong learner who keeps abreast of cutting edge developments in his field; Six Sigma, Lean, Quality Systems.

26794, MASTER SCHEDULER:  Managed production scheduling for molding department. Forecasts inventory and lead inventory control team. Developed production schedule on weekly basic, Managed production manager and supervisor team. Also member of safety team in charge of warehouse safety. Seasoned, reliable, professional self-starter with the capacity to learn quickly and accurately; proven success with managing and motivating employees, implement changes to drive positive results. Keen problem solving and analytical skills; address concerns and perform all duties with a very high level of achievement.

26733, IN-LINE THERMOFORMER MACHINE OPERATOR:  Skills include: Brown, Lyle machinery. Ability to run thermoformer and turn press equipment. Auditing certification. Forklift certification. Experience extruding polyethylene sheet. Bilingual: Spanish. Perform a cold start up and shut down of the extruder. Make proper bolt adjustments. Perform a screen change when required. Startup/shut down thermoformers. Calculate and adjust for proper line speed and heat profile. Recall a recipe for production run. Operate the under press and sheet grinder. Make sure product that is produced exceeds minimum standards

26732, EXTRUDER OPERATOR:  OSHA 7205 Health Hazard Awareness Certified. Bilingual English, Spanish, prompt and organized, ability to work well unsupervised, managerial experience, equipment maintenance, and great communication skills. Ability include: Measure and examine extruded products to locate defects and to check for conformance to specifications, adjusting controls as necessary to alter products. Determine setup procedures and select machine dies and parts, according to specifications. Start machines and set controls to regulate vacuum, air pressure, sizing rings, and temperature, and to synchronize speed of extrusion. Reel extruded products into rolls of specified lengths and weights. Install dies, machine screws, and sizing rings on machines that extrude thermoplastic or metal materials. Sort, grade, weigh, and inspect products, verifying and adjusting product weight or measurement to meet specifications on injection molded machines. Observe machine operations to ensure quality and conformity of filled or packaged products to standards.

26728, Materials Manager:  B.S. in Business Administration. Certified Trainer in Quality Leadership. Results oriented management professional with experience in all aspects of manufacturing, and distribution. Managing multiple facilities, projects, and priorities in a variety of industries including medical device and plastic bottle manufacturing. Excellent computer and problem-solving ability combined with verbal and interpersonal communications skills. Possessing a strong track record of achieving results, managing change, decreasing labor costs, minimizing waste, increasing efficiency, inventory accuracy, and customer service levels, while decreasing costs.

26726, DIRECTOR OF RESEARCH AND DEVELOPMENT:  MS in Engineering. Has used a wide variety of Polymer materials in developing extrusion products and processes to support a growing customer base. Has also had responsibility for the analysis and design of plastics extrusion dies and new process development, new product development, and existing process improvement. Coordinated efforts between raw material suppliers and machine/equipment vendors to leverage internal know-how. Has lead product development efforts for a $40MM+ product line. Previously worked with a team of development professionals to commercialize new technology that grew to over $7MM in seven years. Has Experience with AutoCAD and has used Finite Element Analysis programs such as ANSYS. Proficient in the use of Microsoft Excel, Word and Access database. Proficient in programming with Pascal and FORTRAN languages

26727, TOOL AND DIE TECHNICIAN:  Skill set includes: T IG welding steel and aluminum, MIG welding, all tool and die repair, setup, hydraulic cylinder repairs and installation, surface grinder operation, operating drill presses, taps, and dies, operating lathes and mills, operate small and big forklifts, using micrometers, Microsoft Word, Microsoft Excel, teamwork, leadership, troubleshooting problems quickly and efficiently, time management, and reading blueprints.

26724, PRODUCT DEVELOPMENT ENGINEERING MANAGER:  B.S. in Plastics Engineering and MBA. Over nine plus years of progressive experience in product development and marketing. Responsibilities include Program and Project Management, Product Steward, PMI Member, Candidate for PMP Certification. Managed a staff of 5 product development professionals in the development plastic consumer goods. In the past several years has added nine new products. Began his career as a Process Engineer and was promoted to Product Development and then into management. Worked with customer EHS people to verify OSHA and EPA compliance. Key contributor for multiple articles in trade magazines

26725, PROCUREMENT, INVENTORY, SHIPPING MANAGER:  Extensive experience in all aspects of procurement. Dedicated and enthusiastic contributor; committed to company goals and integrity. Proficient in: MS Office Suite, Epicor Back Office, QuickBooks, Clientele. Efficiently managed a variety of projects and responsibilities on a daily basis. These include: Cycle count, inventory analysis/procurement, and diverse office needs. Managed shipping and front desk staff, resulting in a productive team environment. Prepared detailed inventory history reports of domestic and international information. Worked closely with Controller to research and identify financial variances. Strength in negotiations with suppliers ensuring best price and lead time. Mentored staff members with IT skills

26714, DIRECTOR OF ENGINEERING SERVICES:  BS Mechanical Engineering Technology. Experienced Manager, Engineer, and Project Manager with in-depth knowledge of various types of businesses and operations. Developed and executed multiple cost savings capital projects across multiple locations with annual savings. Possess strong verbal and written communication skills. Consistently demonstrates strong management oversight in all aspects of business and project management. Coordinate replacement parts to unify manufacturers, manage international vendors for equipment projects, create cash forecasting and payment schedules, control budgets and P&L’s, control Fixed Assets, OLV and M&E appraisals, responsible for implementation, installation and acceptance of capital projects, coordinate with sales team on future customers and manufacturing equipment support with ROI calculations.

26713, SUPPLY CHAIN-BUYER:  Masters in Business Administration, BS in Organizational Leadership. Over 25 years of management experience in a warehouse distribution and manufacturing environment. Have been responsible for up to 25 direct reports. Proficient in all areas of distribution, inventory control, purchasing, and improving operational efficiency. Experience/skills with the following: Inventory Control; Purchasing and Procurement; Vendor Management; Management Skills; Budget and Forecasting; Monthly/Annual Reporting; Interpersonal and Organizational Skills; Shipping/Receiving; MRP/DRP; Import/Export; Warehouse Distribution Technology; Heavy Equipment Parts; SAP; Automotive Supplier, Tier III.

26712, QUALITY AND COUNTINUOUS IMPROVEMENT MANAGER:  BBA, minor in Quality Assurance. Over 30 years of successful manufacturing experience in military supply, defense, medical, injection molding, plastic coating, machining, stamping, painting / coatings, and assembly. Specialties: Problem Solving, Lean Manufacturing, Six Sigma, PPAP, APQP, ISO/TS 16949, FMEA, Control Plans, Quality System Development Improvement and Auditing. Lead teams on a global scale identifying potential new supplier's utilizing a risk assessment approach in the selection process. Strong in 8D problem solving, 5 Why, Minitab software. Certified Lead Auditor in ISO 9001/TS16949, AS 9100, and TL 9000.

26019, STRETCH FILMS MANAGER / BUSINESS TEAM LEADER:  Managed the manufacturing operations of stretch and tape films. Senior Level Manager with extensive experience adding value in startup and turnaround opportunities in fast paced 24/7 manufacturing operations. Performance system builder skilled in the application of lean manufacturing and six sigma in an ISO registered company. Proven ability to lead multiple locations through transition to higher levels of continuous improvement. Able to perform detailed analysis of P&L to correct waste, drive vendor collaboration, and uncover financial improvement opportunities. Skilled communicator with the ability to engage and inspire direct reports to the highest performance

26674, PREVENTIVE MAINTENANCE TECHNICIAN:  Has been a maintenance technician for over 25 years. Responsible for facility maintenance, troubleshooting pneumatic, steam, hydraulic and electrical problems. Complete repairs on main and support equipment: CNC machines, band saws , expansion tables, anodizing, dust collectors. Read and interpreted equipment manuals and work orders to perform required maintenance and service. Performed changeovers and line set-up on machinery. Rebuilt and ordered machine parts to build up stock in parts room. Made improvements to machines to increase productivity and efficiency with best quality. Performed plumbing and electrical troubleshooting and repair. Forklift certified (repairs on forklift). Welding (using machinist equipment). Assisted with training of new Maintenance employees and Operators.

26658, ELECTRICAL CONTROLS ENGINEER:  B.S. in Engineering with emphasis in electrical/electronic and mechanical systems. Software experience in AutoCAD Electrical, Allen Bradley/Rockwell RSLogix 5000/500, GuardLogix, FactoryTalk Studio, Panelbuilder32, RSNetWorx, Kinetix CIP Motion, Siemens S7, Insight Explorer (Cognex Vision), Linmot-talk, SEW Movitools, Designsafe, Multisim, Labview, Matlab, Java, C++, Algor FEA, Arcview, MS Word, Excel, Power Point, SCADA/Survalent, Milsoft Windmi. Full PLC, HMI, vision, reject system, servo system program development including recipe-based parameters, alarm handling, integration, UDTs, network configuration.

26663, MAINTENANCE MECHANIC:  Perform preventive maintenance as well as repair and monitor industrial equipment such as: vacuum pumps, 3 phase motors, blower units, air compressors and chiller systems. Can also perform computer diagnostics on systems such as: checking temperature and pressure. Performed mechanical and preventive maintenance on hydraulic machines that produce plastic containers. Document measurements of plastic containers using a variety of measuring instruments such as micrometers and calibers.

26657, PRODUCTION SUPERVISOR:   Have supervised and coordinated activities of 15 – 30 workers involved in production. 23 years of progressive experience in production, quality, safety and cost control for plastic manufacturing plants. Strength in improving processes and work procedures, supporting continuous improvement programs. Practice in ISO 9001 certifications. Excellent interpersonal skills, collaborate with my team and customer to identify and remedy quality issues. Strengths include the ability to multi task, manage projects and work well under pressure. A strong supervisor able to train and motivate employees to peak performance.

26668, SENIOR POLYMER CHEMIST/ENGINEER:   Ph.D in Polymer Engineering. Problem solver who is a technically sophisticated, hands-on polymer engineer/scientist with demonstrated ability to make exceptional contributions in all facets of product and process design, including raw material input and supplier selection, product formulation, manufacturing process design, technical service, applications engineering, and technical marketing. Solved discoloration issue on the molded polypropylene parts for healthcare/medical device by injection molding condition adjustment and right product suggestion that led over $1M commercial value. Developed a new testing method of yellow index on the molded customer parts and accelerated aging method that can simulate customer storage condition

26671, TEST/LEAD OPERATOR:   Over 10 years’ experience as a forklift operator and operating a pallet jack. Can act upon specific written and/or verbal instructions. Can complete machine setups and change overs. Proficient on SAP and Microsoft Suite/Office. Machinery working knowledge: Spray dryers, hazardous waste disposal , labelers, automated fillers, conveyors, mixers, pelletizers, packaging & forklifts

26565, SAFETY AND TRANING COORDINATOR:  Assisted in directing the safety program plant wide and also lead the safety committee. Tracking STOP cards (observations) utilizing the STOP program to direct focus, incident investigation and reporting, and leading the Plant Safety Days. Familiar with Husky, Sidel, Nissei, and Aoki machines. Have strong mechanical skills and good logical troubleshooting skills, Experienced with Microsoft Word and Excel and has some SAP experience.

26624, PRODUCTION SUPERINTENDENT:   Responsible for 8 Line supervisors, and a total of 80 employees. Is familiar with extrusion processing ; twin screen extrusion lines, R&D, and single screw lines. Skilled at project implementation, troubleshooting hardware devices; SAP, AS400, Proficient with Visio, SQL Server 2005, Excel, PowerPoint, Windows XP, Vista; and Microsoft server 2008. Establish 5S culture throughout the plant by on-the-spot and monthly area inspections, also uses DMAIC, quick change over, RCA tools and visual management techniques and procedures. Improved the Standard Operating Procedures (SOP) by making them more detailed and accessible by computer.

26564, MAINTENANCE ENGINEERING MANAGER:  BS in Industrial Engineering, OSHA 10, AutoCAD 12, and AutoCAD LT training. Over 20 years of experience in Engineering/Maintenance and Operations with responsibility for capital equipment specification, allocation, approvals, and validation. Managed all repairs and replacement of equipment and vessel repairs and piping. Improved reliability of equipment, standardization of parts and repairs, purchased and specified parts and machinery, designed and developed improved processing methods. Responsible for training and documentation of all SOP’s, PMA’s, PSSR’s, and P&ID’s

26528, SENIOR OPERATIONS ENGINEER:  BS Industrial Engineering. Senior operations professional that has an emphasis on lean transformation of an organization through continuous improvement training, implementation, and sustainment using LSS, TPS, and DFT principles. Consistent development and improvement shown in safety, quality, productivity, and customer satisfaction. Six Sigma Black Belt, Kaizen, ISO 9001,14001,18001, QMS-SPC defect elimination, FDA, Supply Chain Management, PMP-PDCA/DMAIC/6S/3P trained.

26522, DIRECTOR OF OPERATIONAL EXCELLENCE:  20 plus years of successful experience managing engineering, innovation, intellectual property, product, and process development, R&D, manufacturing and business operations. DFSS, Black Belt, and PDMA new product Development Professional Certified. BSME and MS in Cross-Disciplinary Professional Studies. Has an outstanding level of creativity and technical competency with a proven ability to manage organizational initiatives in a variety of industries producing world class products. Responsible for development of regional supply chain strategies aligned to marketing and sales for $500 million Film Capture business. Excellent communication and presentation skills.

26407, PROCESS ENGINEER:  Associates Degree in Chemistry. Process engineer with experience in a chemical manufacturing environment, and process improvement. Results driven individual with quality standards, production volume, plant efficiency, and worker safety at highest priority. Has overseen maintenance and maintenance cost tracking. Collects, analyses, and reports production data for batch production lines ; containing daily efficiency, product efficiency, and percent production by products. Developed new shift patterns and working structure for production operators in collaboration with operations manager and production manager. Increased overall production efficiency by adding scheduling flexibility for production lines.

26510, LEAD MECHANIC, FABRICATOR:  Dynamic mechanic and maintenance technician adept at completing demanding projects within crucial timelines. Thorough, detail, and process oriented with strong follow through skills. Known for analyzing and quickly implementing innovative resolutions. Has recommended design modifications to eliminate machine and system malfunctions. Identified design, process, and equipment options to satisfy client needs, minimize cost, and limit potential operational problems.

26542, SITE MANAGER:  BS in Electrical Engineering. Multi-faceted Manager, Facilities / Manufacturing Engineering/ Site Services professional with extensive experience. Engineering/ Management functions include manufacturing, facilities and production maintenance, information systems, safety, environmental, procurement, contract services and tool crib. Demonstrated success implementing lean manufacturing initiatives utilizing six sigma methodologies. Multi-project and business management experiences with extensive budgetary responsibilities including P & L. Project Manager for multiple capital expansion projects including a Compounding, Mixing and Extrusion facility. Areas of manufacturing expertise includes aerospace, medical devices, Consumer Care Products, automotive components, and electronics.

26494, VICE PRESIDENT OF OPERATIONAL EXCELLENCE AND LEAN SIX SIGMA:  1992,BS in Industrial Engineering. Innovative with an impeccable record in operations, business economics, and industrial engineering focused on optimal integration of people, technology and physical infrastructure. Proven success in exceptional business transformation from start-ups to Fortune 100 companies, while driving strategic growth initiatives within cross functional teams and improving overall business performance and profitability. Led project teams from as few as 10 to as many as 300. Has the following Certifications and training: Lean, Six Sigma, Black Belt, Master Black Belt, 6-s, Kaizen, 8-D Problem Solving Root Cause Analysis, and Cellular Layout Planning.

26415, PROCESS ENGINEER/EXTRUSION SUPERVISOR/OPERATOR:  Worked on the following equipment: 58mm, 50mm, 26mm, and 25mm Twin Screw Extruders. Has built a 25mm extruder, made repairs on various equipment, and designed and built any equipment needed to complete specific tasks. Developed an Excel system for pending samples, commercial product formulas, and experimental formulas. Has experience with hazardous materials and safety equipment, is a forklift certified, trained in lockout/tagout, and fire extinguishing. Excellent problem-solving and analytical skills. Comfortable with change, hands on, proactive, quick learner and an independent thinker.

26480, TOOL AND DIE SUPERVISOR:  Experienced Tool and Die Supervisor that has managed 25 plus toolmakers and developed an apprentice tool maker program. Responsible for the productivity and mold utilization performance. Created budgetary needs for department including new injection molds/maintenance and repairs. Has experience tracking all safety, maintenance and departmental efficiencies to ensure all work is completed on time. Worked directly with engineering staff on plastic processes and new technologies as well as scheduling and supply chain on issues that impacted schedule or performance, and on problem solving issues.

26356, SUPERVISOR:  20+ years of tooling experience, injection mold knowledge, good work ethic and excellent attendance. Supervise mold press operators and material handlers. Responsible for training new staff, entering daily production reports in computer system, maintaining process documentation, preventative maintenance of production tooling systems, and sampling new tooling for new customers. Performed mold set-up on Cinicinnati Milicron and Mitsubishi injection mold machines. Also experienced with Wittmann robots.

26458, MANUFACTURING MANAGER:  Bachelor degree in Business Management. 12 years injection molding management experience. Accomplished leader in the areas of Project Management, Production Management, Operations and Logistics with a proven record of accomplishment and delivering results. Manage, develop and refine business processes to generate continuous improvement of results for routine needs. Elevating organizations capabilities to meet unique or short cycle-time requirements. Highly focused problem-solving skills to ensure operational success including ergonomic process improvements. Team building and leadership credentials allowing for maximum performance involving morale and high-energy output of colleagues through hands on approach to leadership.

26531, INTERNATIONAL PURCHASING SPECIALIST:  Certified in Supply Chain Management. Experienced Buyer and Purchasing professional, with an inside sales background and a proven track record of success in reducing costs, forecasting demand, monitoring/tracking shipments, managing product line life cycles, and developing purchasing programs in support of corporate objectives. In-depth understanding of manufacturing processes, with demonstrated expertise in managing purchasing operations and vendor performance within fast-paced manufacturing environments. Strong problem solving and multi-tasking skills, able to handle multiple priorities and meet critical deadlines without compromising quality. Excellent communicator, adept at cultivating effective relationships with internal and external stakeholders at all levels, as well as excel when working independently or as part of a high-performing team.

26348, EQUIPMENT OPERATOR:  BS in Electronics Engineering Technology. 14 plus years of experience working with a variety of machines, plastic materials, and packaging in both industrial and commercial environments. Has thermoforming and extrusion machine operator and technician experience. Experienced in equipment maintenance, operation monitoring, quality control, reporting on production equipment, and machine repair.

26293, MANUFACTURING ENGINEER MANAGER:  33 plus years in flexible packaging (manufacturing), automated machine manufacturing, machine tool, plastic and rubber injection industries. Experienced in Lean/Six Sigma manufacturing, project engineering, and maintenance and reliability management. Energy Isolation, ESWP, WHMIS, hazard assessment, lean manufacturing and TPM and lean manufacturing and value stream mapping training. Has background in injection molding, printing and rubber processing.

25587, FIRST LINE SUPERVISOR:  30 plus years of experience in medium to large scale food environments. Assembly experience as well as GMP/FDA/AIB. Successfully adhered to USDA, SQF, and Lean guidelines while implementing production control methods to ensure operations remain within company targets. Has technical skills in Prism Manufacturing Resource Planning Application and J.D. Edwards Resource Planning Software.

26277, QUALITY CONTROL MANAGER:  MBA in Executive Management, BS in Organizational Management, certified trainer and lead assessor for ISO-9001:2000, ISO-14001, ISO-0-9000-Automotive Application, and ISO-9000:1994. Has experience in GMP/FDA/AIB, injection molding, and thermoset.

26336, TOOL/MOLD MAKER:  Tool setup and programing experience. This plastics professional supervises and coordinates each job for production and sets up tools per program lists. Programs and operate 5 axis tool grinders and 3axis cylindrical grinders. Can manufacture various steel parts by use of manual and CNC lathes and mills.

26318, PRODUCTION DEPARTMENT MANAGER:  15 plus years of experience in manufacturing and quality in the plastics industry as well as fenestration and metal industries. MA in Business Management. Certified Lean Expert and Six Sigma Green Belt. Great team builder by way of being a change agent, trainer, and developer. Experience includes capital planning, project management, facility design and layout and clean room setup skills. Responsible for 3 different injection molding divisions overseeing all manufacturing and supporting functions within the divisions.

26294, MAINTENANCE MANAGER:  MBA in Business Administration, Lean Six Sigma Green Belt, BS in Liberal Studies, and Associates in Applied Science in Intelligence Operations. Possesses a track record of achieving evidence-based solutions that contribute to profitability, growth, and/or efficiency in the maintenance manager role. Previously managed 24-hour maintenance operations while also serving as process, project, and controls engineering role. Experienced in computerized maintenance management systems and has consistently reduced maintenance costs and technical down time throughout career.

26435, MAINTENANCE MECHANIC:  Candidate has a Master Electrician License and Industrial Electrical/Maintenance License. Is a proactive, productive demonstrating a high level of initiative with extensive experience in maintenance management. Responsibilities: Maintenance for machinery and equipment, troubleshoot all aspects of machinery (mechanical, electrical, hydraulics, and pneumatics, plc’s and Fanuc robotics), overseeing that all work is being done correctly and in a safe manner, LOTO, monthly PM’s, works on CMMS system, knowing the status of all machines through the course of the day, setup, load and operate mill and lathe, can mig, tig, and stick weld, has Blown Film Extrusion and Equipment Manufacturer experience.

26438, QUALITY CONTROL MANAGER:  Candidate has B.S in Business Administration/Management, Lean Six Sigma Black Belt, Certified Lead ISO 14001 Auditor, Certified Lead ISO 9001 Auditor; Certified Mechanical Inspector. Has strength in Statistical Analysis. Responsibilities include: Leading Lean/Six Sigma projects, Train Lean/Six Sigma Green Belts, supplier audit liaison, managed all quality systems and personnel. Candidate has hands-on experience in inspection, lead audit, corrective action, project startup, systems implementation, injection molding, extrusion molding, blow molding, mold process approval and machining.

26371, PRODUCT DEVELOPMENT ENGINEER:  BA Engineering Technology. Certified Six Sigma Black Belt, conduct DOE and FMEA studies, SAP, Color Matching, 5S Lean Six Sigma Cost Reduction Projects, and ISO 2000. Responsibilities: Work and communicate with both internal and external customers in solving problems and providing corrective actions, provide Technical Service visits to customers to evaluate products, setup and run weekly and monthly quality charts, setup operating instructions and process conditions for each product line, evaluate formulations and process equipment for various calendered films – mainly Rigid; Semi Rigid; and Flexible, implement companies cost reduction goals and improve calender yield and output, continue to provide technical assistance to other departments- Printing, Coating, and Embossing.

26429, PLASTIC TECHNICIAN:  Technician with blow molding and injection molding industry experience. Responsibilities include: Training of operators on all shifts, improving cycle times, monitoring and improving machine efficiency, processing new molds for qualification runs, assisting in mold changes, setup and monitoring process parameters, and troubleshooting machine and mold issues, operating up to 18 PET blow molding lines (Nissei). Works with supervisors when major defects or process variants are found and helped promote safety amongst coworkers

26422, PLASTIC TECHNICIAN:  Technician with injection molding and extrusion molding industry experience. Responsibilities include: Quality checks, documenting materials / tools used to complete a job, operating up to six injection molding machines (Nissei 3300 and 3500) at one time, starting and restarting machines and making sure molds are properly cleaned and oils filled. Fork-lift truck operator.

26299, SALES MANAGER:  Diverse, bi-lingual, Spanish, professional with 15+ years’ experience in sales, manufacturing, distribution, overseas sourcing, and operations. Core competencies in: Account management, industrial sales, international sales, product development, and customer relations. Background in strong sales –based skill set with a focus on growing business and building customer loyalty by using a customer based sales approach. Responsible for selling: Industrial film and bags, technical and converter grade films, process print retail packaging, flexo film, bags and can liners for the JAN/SAN packaging industries. Performance driven individual with the know-how to deliver sales results through acquiring new business and growing existing accounts. Road Warrior with hunter mentality and customer focused sales approach.

26284, MAINTENANCE TECHNICIAN WITH A SPECIALTY IN PRINTING:  Electro Mechanic Technician with more than 15 years of experience in managing installations, repairs and troubleshooting of both new and used industrial machines as well as assisting operators as needed to maintain the smooth running of the machines. Candidate has experience with offset printing machines: Speed Master , Kord 64 Heidelberg, Mitsubishi, and Polar. Working knowledge of: 03 phase and single phase circuit, AC/DC Motors, low and high Voltages 110/480. Has FORKLIFT Operation certification by OSHA and seven years technical education with coursework in Graphics Arts Technology from the Technical Foundation of Printing Industries of America. Ensures the development of top quality products, continuously meeting efficiency standards as well as exceeding organizational goals

26425, MAINTENANCE SUPERVISOR:  Skilled electrician / electro mechanic and electronics technician with 15 years plus practicing in the field of maintenance, electrical, machine automation repair and modifications. Oversees safety and day to day operation within maintenance department. Experience with injection molding, blow molding and thermoforming machines working on Ferromatik Milacron, Cincinnati Milacron, Quincy Compressors, Ranger and Yushin robot arms. Also has experience with Shultz blow molding machines. Responsibility includes: Installation of new machinery, maintaining and troubleshooting all machines on the floor; as well as providing technical support on the floor. Skilled in: Programming basic, ladder & machine language, operate lath, milling machines and stick tig and mig welding.

26423, MANUFACTURING ENGINEER:  BS in Industrial Engineering with certification in Lean Six Sigma Green Belk and RJG Scientific Molding. Responsibilities include implementing a mold change board to improve scheduling and mold changes which led to a reduction in mold changeover downtime by performing strategic scheduling. Has reduced scrap by 25% on polycarbonate products by implementing the A3 Method saving over $45,000.00. Also has performed weekly 5S audits to ensure safety in the workplace and continuous improvement on the production floor. Has experience on Toshiba 390 to 720 tonnage, Cincinnati Milacron Hydraulic 1000 to 2000 tonnage, Husky Hydraulic 500 to 1500 tonnage, and JSW Electric 100 to 200 tonnage machines utilizing polyethylene and polypropylene. An effective leader and team builder with foodservice injection molded products experience.

26372, PRODUCTION SUPERVISOR:  Has managed up to 20 operators on a shift. Utilizes Lean and 5S procedures to better define work performance. Has worked with injection molding presses up to 2500 tons for automotive and non-automotive customers. Maintains and adjust machines during startup and production to maintain consistent machine operation and product quality per customer specifications. Can use appropriate measuring devices and basic math skills to record production data into computer system to identify where improvements can be made. Extensive background in personnel management, recruitment, employee relations, and benefit administration in an entry-level management position.

25762, OMSO TECHNICIAN / PRESS SPECIALIST:  Printing Technician with 19 years experience in a dry offset and flexo printing environment. Excellent mechanical aptitude and extensive knowledge of industrial equipment operations. Also have 7 years of supervisory experience. Flexo experience; skilled at printing press operation; ISO certified; press maintenance procedure operation; strong attention to detail; expertise in plate making. Do plate change and size change Omso flexographic sidewall printer. Work closely with printing manager to make customer samples and solve printing issues on press. Select and test anilox rollers for best color match. Mix ink to match customer color requests when needed. Lead Omso team meetings.

25699, EQUIPMENT MAINTENANCE:  Manufacturer of ammo & gun accessories with Toyo injection molding machines and Hass mold making machinery. Machine and repair plastic injection molds made out of aluminum, P20, 420 & S7 stainless steel, A2, O1 and H13. Assemble, and install drill presses, CNC mills and lathes, plastic injection mold machines, punch presses and copper sciaenid plating tanks including running all electrical lines. Maintain all equipment in the machine shop, plating, and plastic injection mold departments. Trained all new employees on machinery. Fabricate and machine specialty automotive parts and other various items. Use of Tig, Mig, Arc, gas, and plastic welders as needed for repairs, maintenance, and fabrication.

25609, MAINTENANCE TECHNICIAN:  15 years experience in machine/building maintenance with strength in electrical, mechanical, and pneumatic. Trained in all aspects of machine/building maintenance, installation, troubleshooting, and repair. Troubleshooting electrical/mechanical failures; understanding processes; electrical skills are equal to mechanical skills; metal fabrication and welding; re-designing machine components to prevent failures. Troubleshoot, replace, and install Allen Bradley PLC Micros and SLC Make program adjustments per process/engineering request. Troubleshoot, replace, and install various types of AC/DC drives, replace DC drives with equivalent AC drives. Company makes rubber/PVC seals for doors and windows. Equipment includes 13 HPM, Welex, Davis Standard, and Diamond American Akron extruders. Also several years experience working on Liberty and Graham blow molding machines used to manufacture HDPE bottles.

25737, MAINTENANCE TECHNICIAN:  An innovative and forward-thinking technician with a successful record of accomplishment in systems engineering, semiconductor processing, end use support, information systems, customer operation, installations, and troubleshooting. Serve as liaison between customers and management to share data and produce integral results. Machinery knowledge: Electroglas Probers/handlers, TSK probers/handlers, Takatori Tapers/detapers, Disco grinders, Branson Ashers, LAM 9600 etcher, 8330 RIE etcher, HP parametric tester, Keithly parametric tester, VLCT tester, HSM tester & Teradyne Testers (A530, A567, A585, and Catalyst). Also, maintained and repaired Eagle Testers, Fusion UV erase tools & Despatch Bake ovens. Repaired and maintained various pieces of test equipment in the wafer test area, including testers, bake ovens, probers, UV erase machines, grinders, tapers/detapers, ashers, and spin rinse dryers. Oversaw four direct reports demonstrating leadership skills. Facilitated implementation of Six Sigma methodologies and participated in the transition from Six Sigma to 5S Kaizen. Maintained calibration records on all tools and support equipment used in wafer test area. Interfaced with external calibration lab and coordinated and performed all internal and external PM’s. Wrote ECN’s, updated probe PM specifications, and completed risk assessments. Wrote all LOTO documentation for all tools in the wafer test area.

25795, SIX SIGMA BLACK BELT ENGINEER / QUALITY MANAGER / PROCESS EXCELLENCE MANAGER:  MBA, BSIE; Black Belt certification; Metrology Certified; ASQ: CQE, CQT; APICS / CPIM certified; AS9100 certified; CMM certified; ISO Auditor certified –ISO9000, 16949, 13485 & 14000; and API Safety standard certified. Multi-disciplined Engineer experienced in domestic and international business development in large and small companies including public, private equity. Dynamic and technically astute engineer with record of energetic leadership in quality, manufacturing business settings. Expert in building multi-functional teams. Consistently successful at delivering results by focusing on both immediate goals and long-term objectives. Manufacturer of plastic molding products, silicones, assemblies, pharmaceutical, medical, and automotive products; ISO 9000, TS16949, 13485, 14000. Provided coordination, implementation, supervision, and development of the incoming inspection, quality control, ISO 9000 activities, QA Laboratory and Quality Assurance departments.

25758, LEAD OPERATOR / TECHNICIAN / SUPERVISOR:  Hard worker who enjoys bringing ideas to help the company thrive. Possess knowledge in Microsoft Word and Microsoft Excel. Trained in Six Sigma, Lean Manufacturing, Kepner/Trego, confined space, fall protection/ladder safety, OEE, workplace violence prevention, hand and glove safety, blood borne pathogens, fire extinguisher training, safety audit, substance abuse prevention, critical process equipment, critical inspection path, fastener training, HAZCOM/MSDS, LOTO, SIP auditor and leadership/ supervisory training. Company produces blown and cast film as well as laminations and served the diaper, sanitary napkin, hospital sheet and other similar markets. Facility housed 8 Davis Standard extruders and Black-Clawson winders and processed HDPE, LDPE, PP, and styrenic elastomers. Worked 12 hour shifts that rotated every six months. Functioned as the Lead for a Davis-Standard line which included being in charge of approximately 12 co-workers safety, performance, training, and quality issues.

25730, PRODUCTION SUPERVISOR:  BS Applied Business, AA Management Development. Over 20 years in management/supervision; 14 years in maintenance; 2 years blow molding, 30 plus years food packaging (printing/converting); 4 years extrusion along with foam conversion. Experienced with MS Word, Excel, PowerPoint; AutoCAD; and SAP. Hazardous Material Response (awareness level) yearly; DOT Regulations review (2008); RCRA Hazardous Waste Management (2008); DDI Influential Leadership; DDI Managing Performance Problems ; DDI Essential & Coaching for Success. Lean concepts: 5-whys weekly as needed, standard work daily, single point lessons as a result of kaizen, or safety and quality issues, hour-by-hour boards as a visual management tool used daily, Kanban, Championed kaizen for TPM, 5S, and inventory accuracy. Responsible for all converting of safety, rates, yields, and quality. Managed 35 employees and all aspects of the plant’s day-to-day operations on eight different converting lines. Brought the CoEx extrusion (bubble wrap) line from negative variances to positive in less than one year using lean concepts and employee involvement.

25747, PLANT MANAGER:  Thirty years of experience in leading manufacturing and management including warehouse and production and inventory control operations. Driven to improve the operations bottom line, efficiency, and customer service through increased expectations of personnel. Also work in coordination with staff involving manufacturing and scheduling. Visionary leader and highly motivated decision-maker with extensive knowledge of manufacturing processes and procedures. Manufacturing plant has 17 heat injection machines, 7 extruders, 10 foam lines, and sales of $27 million per year, 120 employees working in a continuous five day schedule. Molder of plastics used in the food service industry (i.e. stirrers, straws, spoons, knives, foam cups). Focused on reducing production cost, successfully maintaining efficiency greater than 90% efficiency rates in all areas. Computer skills include MRP System; Texlon; Microsoft Access, Word, PowerPoint; SAP; and KRONOS.

25701, RESEARCH AND DEVELOPMENT:  BS Mechanical Engineering, BS Engineering Technology. Engineer with over 16 years of experience with polymers servicing companies in the chemical process, semiconductor, biopharmaceutical, and building materials industries. Strong leader, self-motivated highly engaged, professional. Skilled problem solver and out of the box thinker, recognized for delivering quantifiable, profitable, and high quality results. Formulate fluoropolymer wetspray systems to enhance our Coated Products line – PFA, ETFE and ECTFE materials. Develop a film adhesive for our Field Service group for use in facilities where our standard solvent based adhesive is unacceptable. Manage lab interns – review resumes, interview candidates, coordinate their projects, review results, and help direct or redirect their efforts as they progress through their project. Provide training and qualified personnel performing fluoropolymer air welding in our Bonded Liner and Field Service groups and stainless steel wire meshing for our coatings group. Use SolidWorks and AutoCAD to design tools for use in the shop and equipment to be lined or coated for customers.

25705, PRODUCTION SUPERVISOR:  Have been employed as Manager, Supervisor, and foreman and setup man for the last twenty years; started as operator. I have proven leadership, organization, and seek innovated solutions on productivity. In charge of can liner department as Shift Manager with four Supervisors and 56 employees running eight lines of different sizes of die and bag machines. Equipment housed such as CMD 1500 and Winder 1113 in-line with Alpine extruders. HD and LL type of bag with star seal, 30 million lbs produced yearly of final product. Resin varies on customer orders. AIB, ISO-2001, and OSHA as well as company policies were followed and implemented as being a member of the ISO team. Languages spoken are English and Spanish. Have computer skills with Microsoft Office.

25714, MAINTENANCE MANAGER:  BSME. Accomplished Mechanical Engineer with over 10 years management experience. Excellent understanding in all areas of maintenance, engineering, design, and management. Extensive experience in reverse engineering of various types of equipment and machines. Proven ability to design new part upgrades for old equipment as well as new equipment and machines. Knowledgeable background in electro-mechanical systems, as well as experience with control panels and PLC’s. Have been responsible for up to six direct reports (Electrical and Mechanical Maintenance Technicians). Personally responsible for maintenance troubleshooting and repair of equipment including electrical, PLC's and mechanical. Served as supervisor in charge of repairs, upgrades, installations, and designs of new equipment for the production facility. Responsible for ordering stock parts and maintaining and establishing the budget. Troubleshoot any and all equipment, and delegate the proper maintenance jobs to the appropriate person.

25776, PRODUCTION MANAGER:  BA American History. A highly effective manager who develops and executes cost-cutting initiatives to streamline operations and to meet budgetary requirements. A leader who mentors and motivates and focuses on enhancing employee skills. A recognized decision-maker who is experienced working in both a union and non-union environment. Well-versed with Microsoft Office and several resource management programs (including SAP). Utilize Lean manufacturing principles on a daily basis. Responsible for meeting daily production goals for 19 plastic injection-molding machines. Report daily production numbers for key accounts to senior management. Develop strategies to deal with reasons behind production shortfalls. Evaluate performance of four direct reports (shift supervisors). Also responsible for the performance of the entire production staff (80+ employees). Develop and implement scrap reduction strategy. Teams of SMEs have been created and are assigned to deal with specific scrap generation issues. This has led to a 7% reduction in scrap when compared to 2010 numbers. Conduct daily Health and Safety walks through the entire facility. Findings are documented and passed to appropriate party for resolution. This has improved the appearance of the plant and eliminated many safety hazards.

25742, EXTRUSION MACHINE OPERATOR:  Over 10 years of experience as plastic extrusion machine operator. Citizen of the United States of America. Materials: PET, PS, PP, styrene, GP Styrene, ABS, Celcon, LDPE, HDPE, Molex, nylon, polyurethane, PC, and many others. Plastics concentrate pellets, profile, compounding, corrugated sheets, blending and molding, and tube extrusion machine operator. Performed set up and changeovers, assembly/disassembly, and shutdown of machinery and production line equipment. Accomplished quality control using caliper type measures. Completed report sheet every day.

25642, LAUNCH / PROCESS TECHNICIAN:  Licensed Lift Truck Operator. Computer knowledge: Microsoft Word & Excel. Experienced overhead crane operation. Lock Out/Tag Out. Develop consistent press and robot programs and design end of arm tooling. Process high quality parts to ensure standards and guidelines are met. Correct deficiencies in tool change times and process parameters. Perform preventative maintenance as and when required. Troubleshoot defective parts and processes while maintaining tolerance parameters. Performed preventative maintenance as and when required. Trained new process technician employees. Proficient with Van Dorn, UBE, Toshiba, Cincinnati, and Engel molding machines. Proficient with ABB, Conair, Wittmann and Viper robotics.

25721, EXTRUSION PRODUCTION MANAGER:  BSBA Management w/Concentration in Leadership; Master’s Certificate Financial Management; Yellow Belt Six Sigma Certified. Responsible for up to 35 employees (Supervisors, Line Operators & DST Technicians) at a 24/7 facility. Managed 4 Milacron & Drossbach extrusion lines which produced 4” – 60” HDPE per standard production schedule. Primary responsibilities: employee safety; raw material; production efficiencies; and low cost consumption. Expert status in Oracle software. Helped create SOP for raw material reconciliation which helped reduce variances to within +/-2000lbs. Implemented weight control system which weighed each stick of production in order to save materials consumed. Scheduled and planned 1-2m pounds of production per month. Managed Safety Chairman and implemented best practices to make transparency clear on safety throughout organization. Produced HDPE corrugated plastic drainage pipe.

25778, SENIOR SHIFT LEADER:  Orange Belt certification with Green and Black Belt training. Injection Molding Certification (Routsis). Proficient with Microsoft Office with Excel being strong point. Responsible for over 50 direct reports (train, coach and develop Operators, Material Handlers, Switches and Team Leaders). Currently oversee and direct each support group and the production team in an automotive manufacturing facility to complete all required production needs on the shift while scheduling production needs for the next shift insuring the customer requirements are met by the deadlines given. Responsible for the safety of all employees and the quality of all parts produced in a lean environment. Train and evaluate team members to perform their tasks more efficiently while maintaining safety practices and guiding continuous improvement projects. Material knowledge includes Poly Pro, ABS, etc. Injection molding presses include Boy, Van Dorn, Mitsubishi, and Nissei from micro machines to 1300T.

25766, PLANT MANAGER:  BS Business Management, AAS Liberal Arts with Minor in Accounting, ISO 9001 Internal Auditor Certification. Manage site activities related to 24/7 continuous operations encompassing manufacturing, human resources, finance, maintenance, warehousing, safety, quality and logistics. Schedule and execute lean manufacturing training for entire organization. Designed performance model for lean manufacturing transformation across entire organization, utilizing Toyota Performance System as model. Implemented plan for Every Part Heijunka Scheduling system, reducing WIP while improving material flow/accuracy and eliminating waste from over producing. Developed pull system using a Kanban loop, shrinking raw material inventory 35% or $350K. Manufactured disposable plastics products for the food and beverage industry.

25651, PROCESS TECHNICIAN:  Have completed RJG training courses and have plenty of hands on with the system; can setup RJG on presses to process machines and setups. Troubleshoot presses to improve cycle times and work on processes. Run presses such as Husky, JSW, Demag, Van Dorn, and Cincinnati. Work on and put together end of arm tooling for robotics on presses. Run materials such as polystyrene and polypropylene, with melts that range from 20 to 100. Troubleshot molds we had problems with, to the process, to the wiring on the molds. Troubleshot presses to improve cycle times. Worked on cycle improvements to optimize efficiency and have less rejected parts. Facility housed 42 presses with RJG on all of them. Setup every press to make sure the graphs matched the template that we had already saved to the press. Did mold changes and core changes when needed. Ran presses such as Nissei, Van Dorn, HPM, and Reed ranging from 300 ton to 1200 ton. Ran materials such as ABS, PVC, and styrene. Was the backup supervisor on our shift and took charge whenever needed.

25672, MAINTENANCE TECHNICIAN:  Mechanical journeyman license, Universal Refrigeration Handlers License; certified in CPR and use of an AED. Have been doing facilities and industrial maintenance for 6 years. Good troubleshooting and repair skills. Only maintenance technician on second shift. Responsible for troubleshooting and repairing all of the equipment in the plant. Proficient working on industrial automation systems including variable frequency drives, DC drives, hydraulic and pneumatic systems and PLC's.

25805, ENTRY LEVEL / R&D CHEMIST / MATERIALS ENGINEER:  PhD Materials Science & Engineering; MS Mechanical Engineering; BS Polymer Engineering. Notable projects of last 8 years’ of research include: Creep behavior of PET/PP plastic bottles to minimize weight w/ P&G; Adhesion between thermoset PI resins and titanium/ceramics w/NASA; Mechanical and thermal stress distribution in oil pipelines & coatings w/DOT; Mechanical, thermal, and barrier properties in epoxy/clay nanocomposites w/Dow Chemical; etc. 4 years’ prior manufacturing of extruded and injection molded thermoplastics products. Language skills: Native like proficiency in English and Persian; limited proficiency in Spanish. Several professional publications.

25612, ACCOUNT MANAGER:  Expansive knowledge of plastics manufacturing industry. Background includes a proven track record of sales, management, business development, and customer service in highly competitive, customer-oriented environment. Have been a significant contributor and team player contributing to company growth. Have been successful for developing new business by presenting a professional image of an organization to new prospects; persistent follow-up; overcoming client objections; utilizing strong selling/closing techniques; and building profitable relationships. Sales of capital equipment and services to injection molders, extruders, blow molders, and thermoformers.

25649, NEW PRODUCT DESIGN / DEVELOPMENT ENGINEER:  BSME. Product design and development experience with various manufacturing processes such as machining, stamping, laser cutting, welding, injection molding, extrusion, pultrusion, heat treatment, thermoforming, casting, and grinding. Produced refrigerated and non-refrigerated food and beverage display cases, high efficiency new style gasoline engine, heat-treated steel components, etc. Design software knowledge includes SolidEdge, AutoCAD, SolidWorks, and Pro/Engineering.

25773, PRODUCTION / MATERIALS MANAGER:  10 years’ production supervision experience. Familiar with SAP (materials management system). Expert in Enterprise IQ materials management system. Shipping and receiving knowledge. 3 years’ of materials management. Lean Six Sigma Green Belt. Excellent ability to coach team members towards safe and productive work habits. Familiar with Microsoft Office (Excel, Word, PowerPoint, and Outlook). Expert in value stream mapping and continuous improvement. Skilled in Lean Manufacturing concepts; championed several Kaizen, Kanban, and continuous improvement events. Excellent problem solving skills and corrective actions through root-cause analysis. Excellent interpersonal skills.

25700, MAINTENANCE SUPERINTENDENT:  AS Instrument Technologies. Instrument and electrical professional within the polymer, chemical & oil and gas industries. Plan and schedule maintenance activities for a 3 crew 24/7 operation. Responsible for 20 Maintenance / Mechanical Technicians. Maintain safe training program for all employee at the facility. Oversee all outside contractor activities and safety. Maintain spare parts track for stores. Maintained budget for maintenance department and operations. Leader in 5S activities for the maintenance department. Help with maintaining of PLC controls and programming.

25733, EXTRUSION SUPERVISOR:  13 years in sheet extrusion manufacturing working in such areas as machine operator, production tech, and most recently production supervisor. Possess a great understanding and knowledge of dies, screws, and materials. Skilled at working with materials such as PET (some), ABS, acrylics, PC, TPO, and PC/ABS. Responsible for the supervision, direction, training, and discipline of approximately 25 – 30 employees (Technicians, Operators, Material Handlers, Packers, Shipping, Maintenance and QC). Accountable not only for management, but also for safety (OSHA safety and health rules followed and PPE was worn), production orders, quality, and operation of seven extrusion lines (Welex and others). Provided hands-on training (equipment, process, troubleshooting, safety, forklift, etc), setting operating schedule, and maintaining a safe and clean workplace.

25734, SALES MANAGER / GENERAL MANAGER:  MBA Business Management; BBA Marketing. General Manager with extensive sales and marketing experience and manufacturing background coupled with a history of progressive P&L responsibility and positive results. Strong interpersonal and management skills, and true customer focus resulting in consistently profitable, long-term relationships. $22MM Sales responsibility with nine direct reports covering three branches including Bristol, Knoxville and Chattanooga; encompassing all of East Tennessee. Additional responsibilities include initiating national objectives, generating new business, budgets, sales reporting, employee evaluations, and safety. Improved relationships with core and approved suppliers while negotiating price concessions. Generated 60 new distributor size accounts during first year. Ahead of budget through May 2014. Created an enthusiastic atmosphere to encourage sales force to become more successful.

25791, MAINTENANCE SUPERVISOR:  BS Electronics Technology, Design for Six Sigma. Primary responsibilities included entire machine shop 7/24 maintenance; safety program for the maintenance shop, ensuring the CMMS system was updated and properly utilized, parts and inventory, preventive maintenance program implementation and daily Gemba walks to discuss process and machine issues. Utilized the CMMS system to trend machinery breakdown and track machine downtime. Occasionally aided Technicians as needed, and discussed issues with Operators/Supervisor as problems arose. Managed 15 Technicians. Project management and engineering professional with broad-based experience in diverse manufacturing environments. Committed to a logical, analytical planning process leading to sustainable, profitable results. Expertise in project management, engineering management, plant engineering, electronics, and avionics. An effective leader and team builder with hands-on management style, and proven success in technical and managerial problem solving.

25763, PROCESS / QUALITY ENGINEER:  BA Geography; 16 years in the plastic industry with a strong emphasis in rigid molding. Experienced with troubleshooting of customer complaints issues through process and physical testing. Maintained and operated lab equipment from process application machines to polymerization reactors. Performed analytical and physical testing on resins. Strong safety background with site investigation and HAZMAT Team leadership responsibilities. Process experience in rotational molding, blow molding, and injection molding; pipe, film, and compounding extrusion. Experienced in running a high pressure slurry reactor for catalyst development. Skills include: OSHA Certified Technician-Level Emergency Response; OSHA Certified Incident Command trained; DOT Hazardous Materials Receiving Trained; Forklift operator for both the stand-up and sit-down model; Certified Forklift Trainer; Strong organization and time management skills with the ability to complete tasks in a timely basis; Work well independently or as part of a group effort; and former Army Officer with a strong leadership background.

25756, MACHINE OPERATOR:  Five+ years experience with plastic extrusion equipment. Currently run blown film extruder lines; previously ran flat line extruder and flat line element extruder lines. Learned how to use a fork lift and scissor lift. Became a first responder. Learned how to check the quality of materials. Trained people to run lines. Member of the safety team. Used PP, PU, and Tyvek to manufacture plastic bags, diaper film, and medical linings.

25735, MAINTENANCE /AUTOMATION MANAGER:  BBA Management; Licensed Journeyman Electrician Directly manage a staff of 16, (Maintenance Supervisor, Lead Technicians, Maintenance Tech., P.M. Tech., Housekeeping) and a total staff of 18 . Qualified with an RJG Master Molder 1 Certification. Provide on-the-job training and development for assigned employees. Clearly communicate work responsibility and authority so they may proceed with certainty in the performance of their duties. Install RJG on presses set up E-dart stations. Set up mold. Tie into robot reject signals for multi cavity individual rejects. Design and fabricate all End of Arm Tooling. Responsible for obtaining quotes for robotics and automation. Implement Lean manufacturing strategies and continuous improvement efforts, such as Total Productive Maintenance and 6S efforts. This custom molding shop processes PP, ABS, and PPE and has 45 ton to 750 ton presses.

25664, PROCESS TECHNICIAN / PROCESS ENGINEER / SHIFT SUPERVISOR:  RJG scientific injection molding training and E-Dart experience. Training in 5S procedures. Worked through ISO 16949 and QS9001 certification. Training in various robotics systems. Troubleshot presses 50-2000 tons. Cross-trained in blow molding & vacuum forming. Worked with die-setter and CI Manager in SMED to improve part to part changeover times. Lead Robot Programmer. Implemented mistake proofing with robotics to reject defective parts with sensors and/or cameras. Fully automated insert-molding/de-gating operations. Participated in creation and maintaining of APQP, PPAP, and PFMEA. DOE's on new tools and as statistical means of troubleshooting. Manufactured automotive parts using injection molding presses from 50 to 5000T.

25743, EQUIPMENT OPERATOR:  Seven years plastics extrusion operating experience with multiple downstream configurations. Handled equipment startup, changeover’s, and shutdown, as well as the setup, startup, and operation of extrusion lines. Handled troubleshooting of processing issues (weight issues, color issues that might be out of specifications, streaks). Inspected product to ensure quality of product. Handled basic maintenance issues such as changing filters and fuses. Assisted maintenance when they were called in for more serious issues. Responsible for production reports (run sheet, screw speed, head pressure, scrap time, product produced ). Required to take quality samples twice an hour as well as checking tolerance more frequently to ensure product quality. Experience with SOPs, GMPs, and equipment logbook entries. Represented the shift on Safety Committee. Extruders included high speed Cincinnati-Milacron, Davis Standard, Maplan, and Krauss Maffei. Used regrind and virgin PVC materials to manufacture vinyl siding, trim, molding, and other outdoor siding related items.

25688, OPERATIONS MANAGER:  Plastic/composite hands-on & management experience. Excellent at forecasting, planning, and scheduling. Self starter with proven track record in product introduction, scale-up, and ramp-up. Reporting to the Vice-President Manufacturing, responsible for managing all aspects of the composite plant including R&D. Responsible for Budget and P & L, coordinating activities within 3 departments. Lead production, production control, customer service, quality, and purchasing functions within profit center. More than doubled production to keep up with increasing demand. Developed new scheduling process and database for product specs. Managed all aspect of MRP system. Managed BOMs, inventory transactions and material variances & reports. Purchased raw material thermoplastic composites > $1 million/month. Handled supplier claims. Maintained ISO quality procedures, addressed CARs timely and followed up on SCARs. Produced thermoplastics composite laminates for the transportation industry. Languages: English (Fluent), French (Fluent), Some working knowledge of Spanish. Status Dual Citizenship: USA & Canada.

25673, TECHNICAL MANAGER:  BS Chemical Engineering and 12+ year veteran of the plastics industry. 8+ years of hands-on product and process development experience covering profile and sheet extrusion, injection molding, cast and blown film, wire and cable, blow molding and extrusion blow molding, and rotational molding. Proven technical sales and support track record. Strong resin and additive background including over 2 years of polymerization experience and more than 10 years of compounding and additive experience. Proficiency in thermal, rheological, and physical property testing. A broad knowledge base of thermoplastic resins including olefins, styrenics, PVC, fluoropolymers, and engineering resins. Six Sigma (DMAIC) background. Special knowledge of chemical foaming agents.

25790, PRODUCTION MANAGER:  Master Electrician. Results-driven planning and operations management professional with exceptional communication, problem solving and leadership skills. Manufacturing operations executive with 20 years in management with consistent success in achieving revenue, cost, productivity, and delivery goals. Production Manager accomplished in streamlining production processes, project planning and training and development. Manufactured insert plastic products for the automotive and electronics markets using Nylon, PP, PET, PVC, Delrin, etc. Equipment experience includes Engel, Arburg, JSW, Nestle injection molding machines, and Novapax and Jomar injection blow mold machines.

25757, PRODUCTION TECHNICIAN:  BBA and 10 + years of successful experience working for the recycling, warehouse and drywall industry. Solid experience in all ranges of administrative functions and operations. Exceptional problem solver, driven to succeed and execute complex projects. Highly developed organizational, communication and time management skills. High level of attention to detail and strong ability to multi-task and establish priorities. Multi-lingual: English, Spanish, and French. Apprentice Electrician License. Experience in hydraulic and mechanical controls.

25608, SECOND SHIFT SUPERVISOR:  Over 25 years of experience in manufacture and powder coating operations; over 18 years of experience in supervision and management. Training and experience in lean manufacturing along with facilitating Kaizen Events. Experience in problem solving of processes issues, quality issues, equipment, and powder coating issues. Currently in Union shop; business – powder coating, electro-deposit coating (e-coating) and CARC. Supervise and manage the plant for the 2nd shift through a crew of 60 plus employees. Oversee up to eight production lines and plant support.

25697, MANUFACTURING ENGINEER:  AS Mechanical Engineering and Electrical Technology. Is a focused individual, self-directed and goal oriented. Strong background in maintenance and troubleshooting. Process and procedure driven to improve efficiency, productivity, and quality, to ensure customer satisfaction. Strong interpersonal skills and effective communicator with leadership style that motivates and engages employees to fulfill business objectives and achieve bottom line results. Produced blow molded plastic containers, i.e. bottles, jars, tubes, canisters, jugs, & carafes, for food & beverage, household products, automotive lubricants, personal care, etc. Attended mold repair training; attended SAP training certified to train plants; STOP certified; LOTO Trained and Trainer; Certificate in Project Management; Certificate in Analytical Troubleshooting; and proficient in Microsoft Excel, Word, PowerPoint, and Project.

25640, PRODUCTION SUPERVISOR:  Technical skills: Blow Mode 201, L-Rings, Open Head Drums, Blow Mold 201 Coex, Blow Mode 202, BM 2001, and SBM 21. Supervised more than 25 employees in production, shipping, and other departments. Coordinated and directed production levels to ensure quality specifications were met. Implemented quality assurance programs, maintaining appropriate records and reports. Oversaw production technicians and provided technical assistance when needed, such as maintenance and programming of high level technical machinery (mechanical, hydraulic, pneumatic, sensory and electronic machinery). Identified and supervised correction of line faults and troubleshooting in production. Knowledge of plastic materials and processes; excellent knowledge of injection molding processes and HDPE. Ability to understand hydraulic circuits as it relates to injection molding. Observed all safety and environmental procedures and Good Manufacturing practices. Produced 15 gallon barrels using an injection molding process using Sterling machinery and single to double shuttle presses.

25691, PRODUCT DEVELOPMENT ENGINEER:  PhD Polymer Engineering, MS Mechanical Engineering, ME Polymer Processing, and BS Mechanical Engineering. Over 16 years experience in polymer industry, including over 7 year’s hands-on experience in multi-project management of product design and application development from concept innovation phase, feasibility, scale-up, development to the product launch stage in manufacture environments. Process experience includes on the job experience with cast film extrusion and profile extrusion along with college experience in blown film. Experience with both single and twin screw extruders. Demonstrated understanding and hands-on experience of polymeric material formulation, characterization and processing, such as extrusion, injection molding, compounding, filming, and thermoforming. Excellent records to document new ideas & products, publications (over 20 peer reviewed publications) and file to patents (9 patent applications). Hands on experience with PVC, PE, PP, and fluoropolymer materials. Polymer processing technology with screw extrusion and compounding, injection molding, filming, Brabender internal mixer, two roller mill, and coating. Software: SolidWorks, ANSYS, FLUENT, FIDAP, SAP, JMP, Matlab, Compuplast Virtual Extrusion Laboratory. Languages: English, Chinese (Mandarin).

25746, BLOW MOLD TECHNICIAN:  Maintained, changed over, and repaired the newest line (Universal) of Sidel blow molders. Served as changeover lead from 2010 – 2013. Also worked on SBO 24/26 and other first generation blow molders. Performed PC and PCC repairs and troubleshooting including backups. Worked on peripheral equipment (conveyors, elevators, etc.) Served as a member of GMP and HACCP audit teams. Facility produced containers for sodas, juices, and sports drinks.

25686, MAINTENANCE TECHNICIAN – FILMS:  Troubleshooting specialist; Solid experience in both mechanical and electrical. Have worked with plastic processing equipment, high speed packaging, and food processing equipment. Possess metal working ability; fabrication professional; experience in project finance; weld safety precautions; 120, 240 and PLC wiring. Maintained 3 Davis Standard extrusion lines. Responsible for setting minimum standards and providing technical guidance and support for design, installation, operation, and maintenance of mechanical systems used in the process. Reviewed operations and conferred with technical or administrative staff to resolve production and processing problems. Started up and shut down processing equipment. Troubleshooting problems with equipment, devices, or products. Calibrated or adjusted equipment to ensure quality production using tools such as calipers, micrometers, height gages, protractors and ring gages. Monitored and adjusted production processes or equipment for quality and productivity. Maintained laminator, film and non-woven systems, air handlers, PLC'S, accumulator, treater, Sterling chillers, Yamato ovens, Ropex splice systems, Nordson adhesive melter, and Glycol + chilled water systems.

25715, VICE PRESIDENT / DIRECTOR OF OPERATIONS:  BS Psychology; Six Sigma Green Belt certified. Proficient at sustaining & building long-term customer/client relationships while maintaining a “hands-on” appreciation of the financial dynamic involved within a domestic small business with a global footprint in a worldwide marketplace. Managed & Championed ISO Certification at last two employers. Implementation & management of ISIR/PPAP data submission for approvals of new program launches for Ford, GM, Honda & Chrysler automotive products. Familiar with Department of Defense solicitation fulfillment requirements. Listed one employer as a Certified Central Contractor Registered supplier for DOD solicitations specifically as well as other government solicitation fulfillment contracts available. Proficient at Microsoft Word, Excel Spreadsheet, PowerPoint, and use of 3D modeling software for Tooling & Part review applications. Bilingual Spanish.

25728, MAINTENANCE MANAGER / TECHNICIAN:  Maintained all equipment. Trained new hires. Scheduled all maintenance employees & kept accurate records of attendance, disciplinary, events, etc. Made recommendations for capital spending on large items that could be a possible weak point for process failure. Looked for ways to improve and implemented on equipment design and process procedures. Troubleshot all electrical controls, IO and PLC programs, made changes where necessary. Troubleshot AC/DC drives, motors, controls, extruders, gearboxes, and any associated equipment. Implemented PM schedule on all equipment. Kept accurate records of all items purchased for maintenance and all work done to equipment. Maintained closed loop water system by ensuring proper chemical treatment and maintaining all equipment involved including chillers, pumps, filtration, pressure and temperature sensors, heat exchanger, cooling towers, PLC hardware and programming. Repaired and maintained several hi speed inkjet printers. Participated strongly on 5S and safety teams. Ensured changeovers are done swiftly and safely with coordination from maintenance team. Manufactured molded and fabricated foams, i.e. insulated containers, surfboard blanks, packaging, construction applications, toys, sporting goods, etc. Materials used included PS, PE, polyurethane, PP, and copolymers.

25670, THERMOFORMING LEAD PERSON:  5+ years experience in operating, processing, and training others to use plastic thermoforming equipment. Train and aid techs in running of machines. Order supplies for thermoforming using JDE. Communicate with peers. Compile weekend list. Complete end of shift report during the week and weekends. Able to give breaks to any running line. Manufacture disposable drink cups.

25802, R&D MANAGER:  PhD Chemistry; BS Biochemistry. Highly innovative PhD with over twenty years experience in plastic/polymer materials R&D and new product development. Materials worked with include PEEK, Ultem (PEI), PC, PA-6, PA-66, PBT, PET, Ryton (PPS), Noryl (PPO), ABS, POM, Udel (PSU), HDPE, LDPE, and LLDPE. Worked with customers (nationally and internationally) providing training, demonstrations, problem solving, and sales related visits. Extensive natural problem-solving abilities. Strong communication skills - very comfortable and effective working with people of all backgrounds and education. Manufactured non-pneumatic tires for military and commercial applications.

25765, PROCESS ENGINEERING MANAGER:  Extensive process experience with compounding of plastic resins. Designed processes for numerous tolling customers. Designed screws for process specific applications. Captured new business through understanding and meeting the specific needs of the customer. One direct report. Set up SOP’s for Operators. Provided production reports for both proprietary and tolling products. Tracked and maintained inventory for all assigned products. Worked with Quality Department to insure testing was pertinent. Provided procedures for blending operations. Took on additional role when SAP was implemented. Led Safety Sub-Committee and assigned roles for each member every month. Equipment experience with Farrell F80 Banbury; Farrell CP23, CP45, CP57; W&P ZSK90, 92 mega; Buss Kneader 140mm, 70mm, 46mm 15:1 & 7:1 L/D; Mixing Henschel 2000 liter, 500 liter, 75 liter; and Maris 500 liter mixer/cooler.

25784, CNC MACHINIST / PROGRAMMER:  Over 7 years experience as a CNC Operator and writing programs; and, 1 year experience as programmer and using FabriWIN with SolidWorks 2011 to generate (G) and (M) line-code programs. Over 7 years experience as a CNC Operator and writing programs; and, 1 year experience as programmer and using FabriWIN with SolidWorks 2011 to generate (G) and (M) line-code programs. Experience in brake press, punch press, RAS, Chicago, Cincinnati Press Brakes, Herr-Voss Leveler, Amada Turret Punch Press, Komo, Heian, and Shoda routers, Salvagnini Punch Press, Programmable Logic Control, FANUC, and analog controls. CNC router experience (Komo, Shoda, Heian) and CNC Haas Mill. Experience and continued education in SolidWorks 3D Computer Aided Drafting and C++. 1yr. experience creating programs with FabriWIN, 7 equal years of hand writing programs along with running NC file programs efficiently on CNC touch screen controlled machinery. Other software used includes MS Office (Outlook, Excel, and Word), GroupWise; ProComm; AutoCAD, SolidWorks, and FabriWIN (MetalSoft).

25792, FIELD SERVICE TECHNICIAN / MAINTENANCE SUPERVISOR:  Efficient and organized Maintenance Supervisor with over 10 years of experience. Strong aptitude for organizing maintenance shops to expedite service and repairs with optimum quality. Adept at supervising up to 27 union and non union shops, including training technicians on a variety of machinery. Expertise in machine manufacturing and automation and preventive/corrective maintenance and CMMs for numerous industries, including automotive, pharmaceutical, packaging, and food processing. Maintenance Shop Supervision; Preventive Maintenance; Machine Modifications; Technical Training; Programmable Logic Controllers (PLCs); Pneumatic Diagrams; OSHA Regulations; Computerized Maintenance Management Systems; Project Management; Team Building. Performed electrical installation and troubleshooting, AC/DC 3phase, hydraulic systems, welding (Mig, Tig, and Stick), lathe and milling machinery, SLC 500, PLC-2 processors, ISO14000, Lean Manufacturing. Installed and maintained both can and PET bottling equipment.

25611, MATERIALS DEVELOPMENT CHEMIST / MATERIALS ENGINEER:  BS Chemistry and 2 years experience in a manufacturing environment. Formulate new glass and carbon fiber chemistries for sheet molding compound (SMC). Alter existing SMC chemistries to resolve production compounding and molding issues. Scale up from lab to manufacturing facility. Prepare and evaluate materials for mechanical and physical properties. Utilize DOE and FMEA methods to improve productivity. Develop interior and exterior automotive materials. Quality test using ISO and ASTM standards. Analytical testing includes GC/GC-MS; DSC; TGA; HPLC; Flash Points; Karl Fischer Moisture; Water Absorption; Tensile/Flex Strength; IZOD; SpG; and Boron Numbers. Computer skills with ChemBioDraw Ultra; SciFinder; Maple; Spartan ’10; MathCAD; and Micromet.

25726, QUALITY ASSURANCE / SHIPPING AND RECEIVING MANAGER:  AAS. 27 years professional manufacturing experience in rubber compounding and mixing, and plastics extrusion facilities. Responsible for development of quality inspection plans, quality control criteria, supervision of quality department personnel including strategic planning, establishing departmental and individual goals and performance reviews, training to Malcolm Baldrige criteria, quality team facilitation, quality assurance, ISO9001:1994 and ISO9001:2000 quality standard documentation, training, implementation and auditing. Facility manufactures rubber mats, athletic flooring, etc.

25736, ELECTRICAL ENGINEER / PROCESS TECHNICIAN:  Recently acquired BS Electrical and Communication Engineering; AS Computer Electronics and Engineering Technology. Additionally, has 7 years experience functioning in the capacity of a Process Technician, performing mechanical and electrical preventative maintenance on all machines, and corrective maintenance as necessary. Experience in electrical troubleshooting manufacturing production equipment, including pneumatics, hydraulics and rotating equipment. Maintenance responsibilities are to adjust oven temperatures, air pressure, gauges, blow forming, vacuum pump, valves, hydraulics, pneumatics, and regulators. Function responsibilities are to work with programmable logic controllers (PLC), to correct and resolve all problems by adjusting the servo-motors, correcting programs, changing pressure on the gauges, valves and temperature. Working with servo motors, VFD drivers, PLC LogixPro 500. Grinders must be adjusted to proper speed and repaired periodically. Change over all molds, connect, and disconnect all electrical components. Train new employees to have knowledge of the machines' operations to the level in which the employee can safely operate a machine independently. Manufacture clamshells for produce and custom labeling. Materials used include PET. Process knowledge of thermoforming, extruded sheet, printing, and GMP. Bilingual English and Spanish.

25719, CONTINUOUS IMPROVEMENT ENGINEER:  MBA Business/Finance; BAAS Engineering Management; AA Administrative Management; Certificate in Project Management; Six Sigma Black Belt. Skilled at bringing together cross-functional teams to handle continuous improvement activities, streamline operations, increase efficiency (OEE) and quality, cost reductions and capital acquisitions and procurement. Extensive experience within ISO 20 years + and FDA 13 years regulated companies providing millions of dollars in savings per year. Background in high speed packaging (pouches for juice drinks), extrusion (for medical devices-tubing for interventional radiology), lamination (pouches for juice drinks), defense electronics, semiconductor, medical device, and automotive manufacturing. Processes used: Blow molding, ultrasonic sealing, hot filling. Materials used: Laminations, resins, 100% fruit juices, flavoring, vitamins. Equipment: Proprietary equipment is 29 fillers, 23 Pouch makers, and Hermann ultrasonic welders.

25695, MAINTENANCE SUPERVISOR / TECHNICIAN:  Highly motivated, technologically savvy, professional adapt at problem solving, predictive maintenance, budgeting, and cost savings plans. Manage an 800,000 square foot facility. Responsible for all contracts and services to include HVAC, water treatment, lighting, water and sewer, gas, fire systems, chilled water, compressed air. Job also includes writing contracts for services, bidding new and existing services, ordering parts and supplies, scheduling and planning all preventive and predictive maintenance. Directly supervise 3 Facility Technicians. Equipment includes 3 blown film lines and 3 cast film lines. Facility produces blown film and cast film products.

25647, PRODUCTION SUPERVISOR:  Managed one of the crews through a rotation shift with 14 full time employees and contract workers in irrigation extrusion process. Oversaw safety, quality, production and reduced cost in material usage and labor working with SAP, Outlook, Oracle and Meri software system. Setup and made changes to extrusion machines using hand tools. Reduced cost in extrusion process checking quality, safety and production. Materials used include PE, nylon, and PVC.

25799, PROCESS TECHNICIAN:  An experienced plastics Process Technician with 23 years spent in injection molding of TPE, Nylon, PP, PE, Silicone and other materials. Well versed in injection molding machine controls and set points. Knowledgeable in process troubleshooting, SPC, and Root Cause identification. Worked with Cincinnati, Husky, Engel, Krauss Maffei, Ube injection mold machines up to 2000 tons; multi-cavity (up to 48 parts) and single cavity molds; and double shot molding (Nylon, silicone, etc). Worked with hot runner systems Synventive and Husky; Sepro robots; and valve gated tools. Strong knowledge of root cause identification for injection molding; injection molding machine controls and set points; and setup including hot runner controllers, thermolater, water flow, gauge or install nozzle tips, etc. Manufactured interior and exterior automotive parts.

25702, RESEARCH AND DESIGN ENGINEER:  BS Chemical Engineering. Highly motivated Chemical Engineer with over four years of professional experience working with fluoropolymer coatings, linings, and rotomolded accessories for industrial equipment. Experience in project management, laboratory testing, and process improvement. Design fluoropolymer mixtures using various dispersion techniques. Designed a conductive blend of polymer for use in flowmeters. Developed a pigmented version of an existing polymer to meet color needs of an application by dispersion and visual testing. Manufacture thermoplastic products for corrosion protection, high purity fluid management, and release application using PTFE. Software experience with SolidWorks and AutoCAD.

25693, PLANT MANAGER:  Coursework in Business Management; Veteran. Accomplished and respected Plant Manager with 26 years experience in production and management with a solid history of company loyalty and promotion within the organization. Achieved exceptional production and safety records while providing effective leadership. Detail oriented with excellent multi-tasking skills, capable in independent operations and team dynamics, as well as exceptional interpersonal and communication abilities. Six Sigma Green Belt Certified. Proficient in SAP Programs, EMIS Systems, and Microsoft Office Suite (Word, Excel, and PowerPoint). Managed a staff of 60 employees and manufacturing operations including financial, production, safety, and quality assurance. Communicated effectively with high volume clients. Manufactured bottles for the food industry using PET, HDPE, and PP.

25789, CAD DESIGNER / CNC PROGRAMMER:  BS Management with an Industrial Business Management concentration: AAS Machine Tool Technology. Mastered SolidWorks and MasterCam with seven years of use. Skilled in Tig and Mig welding. Received Advanced MasterCam X4 & X7 training. Proficient working with ProE and SolidWorks files Iges or STL. Experienced in using ERP software. Work with Quality Engineers and Project Managers to coordinate mold changes. Use QC specs and update CAD files to meet changes. Work with toolmakers to modify plastic injection molds. Order materials and other tools to insure on time delivery to customers. Develop SolidWorks CAD files and Unigraphics NX 7.5 CAD and CAM files. Build new mold components and repair broken components. Used Hass CNC mill, lathe, grinder, Bridgeport used. Investigated how molds were broken and designed better components.

25615, TEAM LEADER, BLOWN FILM EXTRUSION:  Supervise 5-7 employees a shift. Working blown film extrusion Team Leader who has to make sure the right product is run, that it is run with good quality, efficiency, minimal downtime, and to customer expectation on two lines. Conduct monthly safety meetings and daily safety topics. Serve as an ISO Team Leader since we are an ISO certified company. Schedule overtime when necessary. Performed evaluations and training for employees. Ensure machine efficiency goals of 87% or more are met. Quality Management System – ISO9001; ISO Team Leader. Use Gloucester Blown film lines with 45” and 85” dies, mono- and co-ex; bag machines and drawstring machines.

25771, PRODUCTION MANAGER:  Extensive experience in the plastic packaging industry, troubleshooting customer issues, and finding a workable solution. Trained in ISO and AIB standards and used those skills to provide guidance and leadership in achieving certifications. Responsible for all activities for 7 lines in the Co-Extrusion Blown Film Department. Conducted reviews and disciplines for 50 direct reports. Performed inventory control. Quality, AIB, and ISO audits. Involved from startup of production facility. Wrote all procedures for process, production, and safety training. Safety and Training manager. Is trained and experienced with the Blown Film Machine Direction Orientation (MDO). Materials used include PET, PE, EVOH, and Nylon.

25796, PRINT PRODUCTION / MAINTENANCE MANAGER:  Multiple continuing education classes including: Supervisor, Manager, Six Sigma, Problem Solving, Sexual Harassment, OSHA, NSF Food Safety, Team Building, Dry Offset Training, etc. Extremely knowledgeable when it comes to dry offset printing, helping many suppliers develop and improve the dry offset technology. Have worked closely with Van Dam machine, Polytype, Omso, Kase, Zeller Gmelin, Image Inks, Joules Angstrom, Kohl Madden, NCS, The Flint Group, as well as many others. In charge of Print Department as well as Print, Mold and Facility Maintenance including PM'S, LOTO and Arc Flash. Also oversee all press proofs and virtual dealing with customers on matching approved artwork. Oversaw Print Department (Dry Offset), Injection Molding, Art, Strawline and Special Projects Departments. Also oversaw all press proofs and customer approval process. Manufactured cups, straws, and printed on products.

25675, EQUIPMENT OPERATOR:  Certified in the five gallon non-spill work cells, running a foam and plug inserter and the heat-seal labeler (these assembly machines inserted a foam cushion and a plastic plug into 5 gallon water jug caps to stop them from spilling when being installed on a water cooler). Certified to run the liquid foam inserter (a proprietary machine used to heat foam glue which greatly reduced waste for doing the above function). Set up, operated, and maintained high speed injection molding equipment to efficiently produce a quality product and provided training assistance as needed. Trained individuals on 2-color machines, robots, and grinders. Continuously monitored machines and the product being produced for potential problems or defects ensuring the product was made according to ISO and government standards. Performed assigned preventative maintenance on machinery and equipment including cleaning tie-bars, checking robotic airlines, jaws, screws and lubrication points were working as they should. Cleaned and maintained grinders including checking screws, motors, belts, and oil levels. Performed color changes on a regular basis. Used Nissei, JSW, and Krauss Maffei injection molding equipment, and Uniloy blow molders. Made insulin syringes including barrel, plunger, gaskets and protective caps; also introducer kits for hospital and surgical procedures. Materials included HDPE and LDPE, PP, TPE, Acrylic and PC.

25718, LINE SUPERVISOR / PROCESS TECHNICIAN:  Extensive training: Injection molding process classes, Van Dorn Customer Training classes, Paulson Injection Molding CD-ROM series, Wittmann Robotics Basic Programming, Kaizen Leadership classes, Kaizen Workshops, Statistical Process Control Training, QS9000 & QS16949 Training, ISO 14001 Training, and Lean Manufacturing Workshops. Process knowledge includes injection blow molding, stretch blow molding, plastic injection molding, rubber injection molding, and thermoset molding. Presses used include Van Dorn, Krauss Maffei, Cincinnati, Rep, Engel, Uniloy, Nissei, AOKI, Husky, and Toshiba. Materials used are ABS, ABSPC, TPO, Geloy, Silicone Rubber, Thermal Set Compound, Liquid Rubber, Polypropylene, LDPE, and HDPE. Products made range from injection molding for consumer goods, DOD, automotive, agricultural, and military markets to blow molded bottles, pill vials, and closures.

25690, MAINTENANCE MANAGER / PLANT ENGINEER:  AS Automotive Systems and Automotive Repair. Directed all maintenance and product launch activities for a two plant plastic over molding operation. Managed all new tooling and tooling repairs. Managed all high speed assembly lines. Managed budgets. Directed all maintenance activities and maintenance personal in a just in time, just in sequence plant. Managed and updated P.M. programs, department budgets and plant MRO buying, all contractors and builders on new plant projects and equipment, and all aspects of building services. Supported all maintenance activities. Did PLC program management. Managed all floor related launch activities. Led all safety and IOS projects. Performed hands-on repairs. Manufactured foam seating components for the automotive industry.

25755, PRODUCTION DEPARTMENT MANAGER:  BABM, Six Sigma Green Belt trained. Used Lean tools to reorganize Merchandise Department improving productivity. Decreased overtime by 39% and lowered year to date budget by 4%. My group had a 100% accuracy rate on the largest roll out in company history. Meet weekly with Director of Operations, Marketing Manager, and Vice President of Sales to improve communication and operational efficiency. Worked with IT team to implement E1 to manage inventory and order processing. In 2013 department was awarded the 6S Award for organization and sustainability. Manage a group of 15 employees including a Team Leader to Operational Excellence shipping at 99% accuracy. Manufacturer of fasteners, keys, letters, numbers, signs (LNS), and engraving for the hardware / home improvement industries.

25669, INDUSTRIAL ENGINEER:  BS Manufacturing Engineering Technology. Lead multiple teams in different projects to achieve an overall goal. Organize contractors and management as well as communicate with manufacturing to reorganize the factory to optimize efficiency of the facility. Organize Kaizen events to improve productivity in the facility by using upper management and personnel on the floor. Utilize AutoCAD 2D/3D, Autodesk Inventor, SolidWorks, SolidEdge, MasterCam, Microsoft Word, Excel, and PowerPoint 2010. Create production, assembly, and part drawings. Have understanding of achieving and continuing progressive projects as per ISO 9001:2008 Standard. Extensive knowledge and experience in several aspects of manufacturing. Material knowledge of ABS, Acetal, Acrylic, Nylon, PEEK, PET, PETG, Phenolic, PE, PC, PVC, and Polysulfone. Experience with custom injection molding and tooling.

25797, R&D MANAGER:  MS Plastics Engineering and BS Physics. Manage corporate R&D and quality control laboratories, including QC testing at three locations. Direct 3 lab supervisors and 45+ technicians. As a member of the new product development team: evaluate new resins, additives and products for performance and manufacturing concerns; propose new sustainable products, design product formulations, set QC specifications; and manage all lab testing for corporate research and new product development. Polymer knowledge includes LLDPE, LDPE, HDPE, PP, and additives. Manufacture blown film products, i.e. trash bags, construction films, vapor barriers, stretch wrap, etc.

25716, PLANT MANAGER:  MBA Finance, BS Electrical Engineering. Over 20 years experience management, engineering, quality development, finance, and team building in an electromechanical, international manufacturing environment. Achieved operational excellence and customer satisfaction through safe performance, reducing waste, and ensuring high quality standards. Responsible for employee safety, food product safety, following all FDA and AIB/SQF regulations, product quality, ISO manager, production KPIs, new product development, sustainability chairperson, capital projects, and P&L ($20 Million). Improved HS&E from13 recordable incidents in 2007 to 0 in 2011 through 2013. Safety improvements through restructuring, refocusing on safety programs, hazard recognition, and training. Increased extrusion run time from 80% to 89% through disciplined operating parameters and root cause. Improved fiscal controls on maintenance and capital expenditures. Implemented a predictive and preventive maintenance program, as well as a corrective and preventive action program. Eliminated single source resin supply by importing from Brazil, China, Korea, and Pakistan. Successfully created, implemented, and achieved ISO 9001-2008 (no nonconformance’s three successive years). Achieved Superior (965/1000) rating from the American Institute of Backer (AIB) for the past five years. Refocused purchasing methodology; optimizing procurement price, quality, and on-time delivery. Manufactured specialty film used in food flexible packaging.

25703, MANUFACTURING MANAGER:  32 years’ experience in building products such as PVC siding, PVC fence deck & rail and even the latest in the industries cellular deck. Multi-tasking, quality-oriented, technical driven manager, with the experience of leading and organizing production and fabrication teams to achieve their goals. Background includes Director of Services, Production Supervisor, Quality Assurance Manager, Blending Manager, Process Engineer, Grinding Manager, Tool & Die Manager, Technical Services, and Fabrication Manager. A dedicated professional committed to continuous improvement and safety of employees. Accomplishments include 4 major certifications for present employer; design testing equipment; played major role in the implementation of 5 new products; setup the Quality Labs plus equipment; setup Quality Manual and Quality procedures; and setup recycling with 2 pulverizing machines along with a ribbon blender.

25683, LEAN / SIX SIGMA MANAGER:  Results oriented manager with extensive knowledge of human resources, manufacturing processes, materials, product development, and management experience. Six Sigma Green Belt certified with strong lean manufacturing experience. Possess P&L experience and the ability to launch new products within budget constraints. Extensive knowledge of OSHA and safety practices along with safety management. Proven ability to lead teams in excess of 250 employees and develop salaried staff. Teach clients and HR on co-employment rules and laws. Set up safety programs within OSHA guidelines. Lead kaizen events and teach lean principles to clients. Use the DMAIC process (define, measure, analyze, improve, and control). Understanding of engineering process. Knowledgeable about SAP and Lean Manufacturing processes.

25684, MAINTENANCE MECHANIC:  AAS Industrial Systems. Responsible for scheduled and unscheduled maintenance in plant and on equipment. Facility houses 5 HPM injection molding presses and robots. Troubleshoot PLCs, electrical, and mechanical issues. Company makes automotive parts using plastic injection molding and metal working parts. HPM injection molding machines used to make automotive components.

25698, PRINTING TECHNICIAN:  22 years “hands on” offset printing on Kase printers. Printer II – highest level for printing. Cover supervisor's position as needed. Some experience on silk screening and pad printing. All printing experience done on plastic molded products like cups, tumblers, and mugs. Perform setups, changeovers, and process troubleshooting on thirteen Kase offset printing presses. Previously performed setups, changeovers, and process troubleshooting on two silk screening machines, and two pad printers. Products are plastic injection molded items mostly made from polypropylene, some styrene, and some ethylene materials.

25610, PURCHASING MANAGER:  BBA Supply Chain Management. A quality-minded supply chain professional, with over 32 years of domestic and international purchasing, management, operations, shipping/receiving, and customer relations experience. Resourceful problem solver with the ability to develop and implement operational procedures, which improves productivity, reduces costs, and consistently generates profitable results. Directed the operational activities of 2 warehouses; i.e., 1 buyer and 10 warehouse employees. Responded for all capital equipment purchasing and maintained repairs. Negotiated pricing. Had accounts payable responsibility. Set up new sourcing in Latin America and Asia. Formulated training policies and schedules, utilizing knowledge of identified training needs, company production processes, business systems, or changes in products, procedures, or services. Set up MRP and EOQ System. Manufactured Winchester safes; tubing and hose, process pipe and fittings, valves, pumps, filters and filter systems, instrumentation, flow meters, sensors, storage and drums, and corrosion resistant structural products.

25653, SENIOR PLANT MANAGER:  BABM. Vast experience in senior plant management operations (safety, quality, finance). Extensive knowledge of CQI (TQM) philosophy (paradigms and changes). Dynamic leader with strong communication and analytical skills, which has proven to generate creative and workable solutions for complex problems. Bilingual – Capable of reading, writing, and speaking Spanish. Certified by IRCA through examination as an ISO-9000 Lead Auditor. 179 employee facility with 22 machines (Uniloy, Nissei, Krones, Sidels, Royal Wheels, Graham Wheel, and Cincinnati), with multiple platforms, technologies, resins, colorants, and adhesives. Produced injection stretch blow molded bottles for the water, liquor, carbonated and soft drink markets using HDPE, LDPE, PP, and PET.

25666, THERMOFORMING / PRINTING OPERATOR:  Experienced printing professional with more than 10 years’ experience. Always on time, honest, hardworking, dependable and willing to learn new things and take on new responsibilities. Total of three and half years experience in thermoforming as the Operator, Lead Set up, and packer. Certified and trained thermoforming operator. Changed and switched out tooling on regular basis for each individual customer. Performed lock out/tag out during the changeover. Checked raw material accuracy for each customer order and quality assurance. Sencorp 2500 and Sencorp 2500 Ultra; also trained on Brown thermoforming machines. Manufactured flowerpots, nursery containers, decorative resin planters, seedling trays and more for professional greenhouse, nursery and retail garden center operations.

25785, CNC MACHINIST:  Set up and operation of CNC lathes (Mori, Seiki) and vertical mills. Set tools; adjusted programs when needed, speeds and feeds. Wrote programs at the machine if needed. Used G&M Code to program lathe. In addition, operated a Gleason Gear cutting CNC when times were slow. Completed technical program and earned diploma for Machine Tooling Techniques. Courses studied included: Machine Shop Theory, Machining Processes, Metrology/CMM, Machine Trades Blueprint Reading, Turning Processes Advanced, Milling and Grinding Processes Advanced, CNC Operations, 2-D CAM(MasterCam), Math 20, CNC Mill Programming, CNC Lathe Programming, 3-D CAM (MasterCam), Machining Applications Advanced, Progressive Machining Techniques, Tool making Theory, and Advance Machine Concepts. Company made stern drives for boats.

25720, BUSINESS DEVELOPMENT MANAGER:  BA Geography & Minor Economics; various technical seminars and training sessions as well as Paulson educational series on engineering and injection molded plastics. Experienced enthusiastic, disciplined sales & marketing professional with extensive experience developing business, managing key accounts & cultivating long term business relationships. Worked with companies, offering design engineering solutions, mold building, and contract manufacturing resources, supplying components, assemblies and in some cases fulfillment, required to bring their products to market, increase sales and market share. Assisted companies in transition diversify sales base and markets served. Dynamic, technically astute manager, self motivated and consistently successful at delivering results by focusing on both immediate goals and long-term objectives. Advancement roles have included project management, cost estimating and technical sales to Sales Manager and Business Unit Manager, responsible for two operating units of a major manufacturer. Process knowledge includes plastics injection molding and GMP.

25689, RESEARCH / PRODUCT DEVELOPMENT ENGINEER:  MS and BS Materials Science and Engineering. Responsible for formulating, compounding, and processing of various polymer composites using Brabender D6/2 compounder (flex-lip and cord dies). Worked with and helped manage multiple subcontractors on extrusion (from 7 – 17 mil film/sheet), calendering, and coating process scale up at offsite facilities. Materials included polyethylene based monomers and co-monomers, Ultem (PEI) and polysulfones (PES, PSU), extrusion (5-20 mil film) and thermoforming of polymer based mixtures. Optimization of processes and products through Design of Experiments (DOE). Ceramic and material processing with attritors (stirred ball-mills), jet mill, cross beater mill, and thermal presses. Designed test fixtures and performing tests (ASTM and MIL-STD) to evaluate product properties.

25658, FACILITIES AREA MANAGER:  Bachelors Applied Studies with a Minor in Management, and AS Mechanical Drafting and Design. A self motivated Facilities Manager / Facilities Engineer with several years of experience in project management, trades supervision, project planning, preventative maintenance, facility engineering and mechanical design. Supervise, lead, and direct supervisors to maintain all facets of facilities maintenance. Create facility budget, track, and monitor adherence to budget. Lead team of employees to develop cost savings initiatives in the facility dept. Work closely with Human Resources and UAW leadership to negotiate outsourcing projects. Responsible for all facilities engineering projects. Work closely with contractors to quote and award projects in the facility arena. Review projects and compile drawings needed to quote time and materials for maintenance issues. Project Manager for multiple tasks at the facility. Oversee the sale of by-product metals and scrap for revenue. Manage Powerhouse activities including compressed air and boiler operations. Manage outside companies for janitorial services, snow removal, and lawn care for the site. Manage Preventative Maintenance Dept. Create, schedule, and ensure PM compliance. Review spare parts inventory and order accordingly. Managed decommission of 2 plants within budget and completed on schedule. Manage $1.5 million plus energy savings project for heating and lighting. Processes include injection molding and tooling.

25671, PRODUCTION CONTROL MANAGER:  BS Business Organizational Management & HR Management. Responsible for all aspects of materials management. This included Supplier Management, ordering, receiving, warehouse management, production scheduling, inventory control, and shipping. Also responsible for development/training of direct reports, obtaining company goals and establishing departmental goals and budgets, KPI (key performance indicators), and Kaizen (continuous improvements). Manufactures seats, door panels, and floor carpets. Processes include injection molding, robotic welding, vacuum forming, and multiple assembly processes.

25793, SETUP TECHNICIAN:  Maintained injection molding machine parameters per quality needs. Changeover of molds, notching machines, and repairing and replacement of various pneumatic tools, hydraulic tools, machines. Troubleshooting of machines and malfunctions; also troubleshooting of molds, defects to rubber injection molding products as well as notched finished products. Welding and fabrication of tool guards and secondary working equipment. Completed different engineering procedures and processes for notching machines and injection molding machine. Maintained a clean safe working environment. Assisted tooling engineer and molding engineer with new tool design and new mold design. Assisted maintenance with electrical troubleshooting on both injection molding machines and notching machines. Assisted in modifications to notching tools and molds to create faster cycle times and overall more efficient process. Mechanical skills; processing skills with injection mold machines; mathematics used for precision machining of tools. Technical skills include MS Word, Works, Excel, and PowerPoint presentation. Materials used include EPCM and PVC. Equipment consisted of 23 injection presses 55-200 ton, and 12 compression presses 50, 75 & 100 ton. Manufactured molded fuseholders for electrical and electronic industries.

25643, PRINTING PROCESS ENGINEER:  BSME. Manufacturing professional experienced in operations and maintenance management, process engineering, process and productivity improvement, lean manufacturing and capital project engineering and management. Six Sigma green belt certification; experienced in root cause analysis, solutions implementation and driving process improvement via Kaizen events. Managed 40-plus employees in both maintenance and operations functions. Over 10 years, provided complete capital project management for multi-million dollar capital projects. Managed capital projects from concept through start-up, including justification, engineering, specification, RFP, vendor selection, installation, commissioning, and training. Responsible for 9 – 14 direct reports (Maintenance Technicians as well as non-skilled); that covered both mechanical and electrical maintenance tasks as well as general labor that handled and processed the waste paper from the printing operations, preparing it for shipment to paper mills for recycling; this group also handled simple build-type maintenance tasks like light bulb replacement, painting, and HVAC filter replacement. Equipment: Web fed (Komori (Model System 38), and Heidelberg/Harris (Model M1000B)(and sheet-fed (MAN Roland (Models 706 & 708) and Heidelberg ) offset printing presses, Heidelberg offline guillotine cutters, offline folders, mail inserting equipment, and Harris Graphics (Model 855, 755 and 803) Saddle-wire magazine binding lines. Support equipment included carton erectors, carton tapers, strapping equipment, and wrapping equipment.

25752, MACHINE OPERATOR:  Summary of qualifications includes packaging/assembly, troubleshooting, changeover, inspecting/preventive maintenance, electrical wiring, setting labels, machine repair, welding 1 & 2, Basic Pneumatics and Basic Hydraulics 1&2. Forklift Operator. Shift Mechanic; repaired CNC machines. Operating Inspector; did machine set up and equipment troubleshooting. Ran injection molding machine; industrial production processing/assembler. Certificate of completion for Apprentice Process Technician and Industrial Maintenance and Repair.

25741, PRODUCT DESIGN ENGINEER:  BS Aerospace / Mechanical Engineering, and BS Engineering Science. Highly motivated, forward-looking professional with a sound understanding in mechanical and aerospace engineering. Inspiring team leader with the ability to think laterally to provide solutions, exercising independent judgment and decision-making strategies. Outstanding communication and interpersonal skills, with the ability to collaborate effectively at all levels. Skills include ProEngineer / PTC Creo 2.0, AutoCAD, MATLAB, C++, MS Office; well versed in computer hardware/software design, construction, and troubleshooting. Familiar with Lean/Six-Sigma methods and practices to improve quality and, productivity. Acquainted with welding, casting, and metal stamping processes. Leadership/Supervision with multicultural understanding.

25644, PRODUCTION MANAGER:  MS Industrial Technology Management and BS Industrial Technology. A highly motivated, self-disciplined professional with over twenty years of experience in Production Management and related areas, and strong qualifications to accept responsibilities in either Industrial Engineering or Production Management. Wire and cable experience includes extrusion, drawing of copper and aluminum, cabling, tin coating, stranding, and braiding. Capabilities include troubleshooting draw benches and establishing "Set up Sheets.” Calculated the stretch of Cu and Alum wires used in cabling saving my employer $100,000 in scrap avoidance through my documented work instructions. Manufactured connectors, cable assemblies, and antennas. Equipment knowledge includes Ceeco strander, Vaughan and Cook Draw Benches, Davis Standard Extruders, and Rigid Stranders.

25665, PACKAGING MANAGER:  BSEE. Proven leadership with ability to motivate others and encourage peak performance. Strong presentation and report writing skills. Exceptional problem-solving abilities, capable of working independently, and self-starter. Accrued technical/ computer skills in RSLogix, Experion, Proficy,V-Sim, SoftLogix, Wonderware, Excel, Matlab, C++, Visual C, MS Visio, and Microsoft Office. Increased the overall bench strength by restructuring the packaging teams based on the business needs, balance of skills, and personal development opportunities resulting in increased OEE across the board on all packaging lines. (Record Packaging OEE March 2014 – 79.3%). Drive WCO annual plan to eliminate losses, achieve results, and build capability for the future through use of WCO Methodology. Coordinated and supported warehouse inventory WPO allowing for visual at-a-glance inventory analysis. Manufactured bottles for cleaning supplies and refrigerator doors.

25767, TOOL / MOLD MAKER:  Extremely talented at troubleshooting; vast area of expertise; and have been able to fix, maintain, and operate any piece of machinery with minimal training. Work well with others; clean and organized in work skills; have the push forward motivation and determination to complete jobs above standards before deadlines at an above normal pace providing more profit for the company. Repair, maintain, and build new aluminum, zinc, and MIM (metal injection) molds and tooling using mills, grinders, and lathes. In charge of all wire EDM operations, maintenance, and programming using Sodick aq325l machine with MasterCam X version 6/7 and Heart NC program built into machine. Must hold tolerances less than .0002; maintain logs; and keep clean work environment. Also experienced with laser welder.

25794, MOLDING TECHNICIAN / MAINTENANCE:  30+ years experience with plastics injection molding. Skills include setting molds, setting production parameters, maintaining machines, and checking quality of parts. Have acquired many qualifications that will apply to a new career; metal working ex: Lathe, milling, welding, cutting, precision measuring, etc. Wood working ex. General carpentry, sawing, drilling, assembling, finishing, etc. Electrical AC & DC current (120-480v), Plumbing, Masonry, HVAC. Supervision, shipping, receiving, forklift, and quality control (QS9000). Used injection molding presses from 250 to 1,300 tons. Manufactured automotive components.

25745, STRATEGIC BUYER:  BSBA. A diverse background in sales, marketing, customer service, extrusion, and management. Search out new vendors to increase efficiency by lowering cost, shorten lead times, and increase quality product delivered. Work with existing vendors to minimize defects and improve deliveries. Establish metrics to measure vendor performance. Review and adjust safety stock levels within Xaloy while working with vendors to set vendor managed inventory to assure production areas have product in house when required. Performed pressure and temperature measurement and control products for the plastics industry, transducers and transmitters and sensing technologies.

25677, OPERATIONS MANAGER:  Pro Molder 1 Certification in Scientific Molding. Management professional with over 26 years’ experience in thermal plastics injection molding. Ranging in experience from production set up through department management. Solid management skills in recruiting, training, motivating and supervising teams to obtain performance goals. Team player and company interest minded. Most recent 1.5 years, responsible for the startup of secondary manufacturing molding department in South Carolina. Responsible for all machine and production scheduling and overall efficiency of production operation. Prior 25+ years food packaging; responsible for managing up to 25 – 35 personnel including assistant supervisor and lead personnel to carry out all primary and secondary operations concerning production. Produced flexible disposable and reusable medical tubing as well as pool vacuum and car wash hoses.

25540, MANUFACTURING DIRECTOR:  MBA, BSME, Six Sigma Black Belt. Manufacturing Operations Leader with proven expertise leading operations to sustained profitability and growth. Specialized in reducing cost through the implementation of Lean and Six Sigma methodologies. Experienced in leveraging engineering and maintenance to fully optimize operational output. Adept at organizing and optimizing resources to reduce cost, increase throughput, shorten lead times and increase innovation. Direct reports 3; indirect reports 4; employees 300. Reported to VP/GM. Directed all aspects of business unit with full P&L responsibility for $25M operating budget specializing in blow molding, injection molding, film extrusion, resin compounding, chemical compounding, sterile filling, sterilization, and product packaging resulting in the production of pharmaceutical products for the medical industry. Plant floor consisted of Bekum blow molding machines, Toshiba injection molding, and various extrusion machines. Led special assignment team involving 60 people including two consultants to strengthen quality systems by conducting gap assessments across plant operations and quality systems, and correcting deficiencies. Managed production and engineering components for implementation of a $20M new product line in a matrix organization from conception to product launch.

25510, ENTRY LEVEL:  BSME, plus two years internship experience. Senior Design Project: Designed and manufactured a device for lab measurement of flow rates in a micro-channel. Managed multidisciplinary engineering team in project development from conception to final product. During internship: Implemented the use of 3D CAD modeling software for product design and development. Improved existing installation and manufacturing specifications. Invented new installation methods for building integrated photovoltaic products. Managed testing of new and existing products for code compliance. The facility where internship was done does research and development in pultrusion. CAD experience includes SolidWorks, SolidWorks Composer, and AutoCAD.

25505, PRODUCTION MANAGER:  BS Organization Leadership. Core competencies include the following: Respect, morale, strategy planning, EHS standards, ergonomics studies, OSHA standards, ISO 9001-14001,proactive leadership approach, total team environment, lean mfg., kaizen, 5S, housekeeping, TPM, PM, GMP, TQM, SWP, JIT, WIP, training matrix, root cause analysis, rewarding, coaching, corrective action analysis, accountability, motivation and skills development. Drove culture change through individuals and team contribution and expectations in the area of safety, quality, productivity, delivery, and cost. Engaged the work force in problem solving. Implemented the Standard Operation Procedure in the facility and developed the skills of the front line leaders focusing on process, people, and equipment. Through application of VMVO (Vision, Mission, Values, and Objectives), directed, coordinated, and evaluated the activities of production employees. Managed; developed production employees to achieve established goals of safety, environmental performance, production volume, quality, service, continuous improvement effort in supporting culture change which impact organization total cost. Coordinated Lean Manufacturing activities within location.

25519, TOOL AND DIE MANAGER:  Extensive experience in programming, set up, and machining extrusion dies made from 420 stainless steel. Directed all plant operations including accounting, engineering, manufacturing processes, maintenance, sales, purchasing, scheduling, and training. Developed and implemented a business plan. Established start-up operations and logistics; developed a marketing plan and directed implementation. Developed advanced machining technology for all C.N.C. Wire E.D.M. applications. Supervised concepts, set-ups, advanced machining operations and qualifications for maximum throughput of parts/components. Engineered/designed tooling and fixturing used in machine operations. Wrote programs utilizing MasterCam and proprietary C.N.C. Wire E.D.M. software. Developed and conducted training to improve set-up skills and utilization of new technology. Most recent 7 years have programmed, set-up, operated, and trained others on the safe operation of metal working equipment.

25502, PROCESS ENGINEER:  MS Macromolecular Science & Engineering, BS Polymer Science with minor in Materials Science. Proven success in plastics processing and formulating polymers with additives into coated films, laminates, coextruded films, adhesive tapes, medical devices, and transdermals. Site Change Control Leader – controlled and improved validation system with annual process capability linked to quality system changes, created program for single point lessons and SPC. Prepared documentation for ISO 11607 compliance regarding process control, risk assessments, software validation, and process alarm validation for increased customer requirements. Worked with maintenance department to support operator understanding of machine controls and helped them problem-solve. Produced flexible packaging for the food, beverage, pharma, personal care, medical, and industrial markets.

25501, ELECTRICAL DESIGN / DRAFTSMAN:  Electrical Design Draftsman with extensive experience working in production engineering environments. Ability to work various projects at different stages of production, in a timely manner. Adaptive to change and utilizing new technologies within the manufacturing industry. Worked extensively as a CAD system administrator. Provided electrical engineering and design, for new projects and retrofit projects, for an original plastics extrusion equipment manufacturer. Generated CAD (Adept-E) electrical schematics and MRP based, electrical bills of material, for freestanding power and control enclosures, operator consoles, operator consolets, and junction boxes. Electrical schematics were based on PLC industrial controls, or discreet industrial controls. Created accurate enclosure layout drawings, discreet instrumentation layouts, and HMI layouts. Maintained extensive drafting/engineering directories for, electrical symbols, electrical device symbols, modular circuit schematics, and vendor drawings. Following are various CAD systems software utilized during many years of employment: Promis-E / Adept-E (ECT); AutoCAD, 2011; AutoCAD, 2008; AutoCAD, 2006; AutoCAD, 14.01; Auto-trol, series 5000; Auto-trol, series 7000.

25466, CNC MACHINIST:  12 years Wire EDM experience. Follow Wire EDM current applications through studying manuals and current publications as well as day to day operation of two machines at a time. Program and train others on the EDM. Implemented and developed EDM practices and CNC lathe. Operated Makino EDM; operated and performed maintenance on Hwacheon CNC lathe and Fanuc controls. Received certificates for the operation of Mori Seki CNC mill operations and OSHA certification for forklift operation. Two years training in setup and operation of Zeiss CMM systems. Developed CNC lathe programs and procedures for inconel castings on Hwacheon CNC lathe (used for FAA turbine engines) and was instrumental in the company gaining FAA certification. Assisted Engineering Programmers to implement 3D programming on Sodick Sinker Wire EDM.

25485, MANUFACTURING AND FACILITY / MAINTENANCE MANAGER:  MS Management, BS Electrical Engineering, Six Sigma Black Belt. 8 years experience in plastics manufacturing; 8 in metals injection molding; plus 6 year military veteran. In plastics manufacturing, produce rubber pet toys. Completed costing models using forecasted sales, futures rubber price, loaded labor rates, and overhead to ensure manufacturing’s parts were priced accurately to ensure profitability. Ordered, tracked, and maintained all of the rubber supply needed for the manufacturing department. Scheduled delivery of natural rubber (40,000 lbs. a week of various colors), PPE, and other production supplies, and ordered all machine spare parts. By using the Six Sigma methodology DMAIC, was able to pinpoint process problems and install a performance metric system that reduced waste and increased profit margin by 25%. Equipment knowledge includes Battenfeld, Rutil, Mapelli, and Desma.

25507, LEAD TECHNICIAN:  AS CAD, RJG / Decoupled Molding training. Extensive knowledge in decoupling and scientific molding, engineered resins, injection molding machinery, and foam molding, 75-1600T. Ability to work with lathes, mills, extrusion, blow molding, and insert molding equipment. Familiar with Allen Bradley and Siemens PLCs. Familiar with SPC, ISO 2001 2002, Kanban, and 5S. Computer literate; bilingual English / Spanish.

25500, GENERAL MANAGER:  MS Administration, MS Plastics Engineering, BS Plastics Engineering, Six Sigma Black Belt. Performance-driven executive with continued profitability improvements through focused strategic workflow, staffing, and business practice analysis. Expertise in operations, engineering, and multi-plant management with proven skills in Lean, Six Sigma, and productivity improvement. Major strengths in operational analysis, leadership, team building, and complex manufacturing problem solving. Responsible for commercial, technical, and all operational requirements of autonomous division. Reduced LTPO from $1.6MM to $700K resulting in 11% improvement in delivery performance. Developed disciplined focus on new product development “NPI” for best in class commercialization. Increased internal first pass yield from 89% to 94% along with 21% improvement in quality turn-backs. Reduced TIR incident level by 30% via focused safety improvement. Seven years experience with adhesives and flexible packaging. Bi-lingual Dutch and English.

25490, LEAN MANUFACTURING EXPERT:  BS Elementary Education. A results oriented, hands-on individual with more than 18 years of progressive manufacturing management experience. Management style strongly emphasizes teamwork, creativity, and empowering people. Provide management and consulting services in the areas of: Lean manufacturing, Kaizen, performance metrics, plant layouts, standard work, cellular layout, Value Stream Mapping, and plant cost-reduction activities. Implemented lean manufacturing, Toyota Production System, throughout a $112 million process plant. Injection molding machine: Multiplas 1000 ton: casing for digital controller, improved OEE by 10%. Transformed the production methodology and saved $500,000 from a push system to a pull system utilizing transformed cellular manufacturing and implemented Kanban inventory systems with suppliers and customers resulting in: Streamlined inventories by 50%; Improved customer delivery performance from 85% to 93% while reducing lead times by 60%; Accelerated plant responsiveness by implementing an escalation process and visual Andon resulting in improved response time of 60%; etc.

25514, SENIOR R&D SCIENTIST:  PhD Polymer Chemistry and Physics. Technical leader of new technology development. Example of current projects: water based and UV curable decorative coatings developments for paper bases; new product development of froth coating for packaging and publishing applications; new decorative technology development for paper and non-woven bases; new product development of PU foam and PU film for medical applications. Prior plastics projects include: new solvent based flexo inks development for untreated polyolefin films; new product development of UV curable flexo inks for outdoor bag application, and mid-range flexo lamination ink system; and adhesion of inks to flexible plastic films and fundamentals of lamination adhesion study. The work resulted in two PCT patents open.

25491, CNC MACHINIST:  7+ years experience; exceptionally skilled in axis CNC machining, tooling and fixtures. In depth knowledge of drawing interpretation. Hands on experience in calculating and setting up machine controls according to production. Able to read and interpret blueprints effectively. Participated in programming course for Nakamura-tome CNC lathes with Fanuc controls. Set up, operation and programming of CNC lathes with twin spindle single and double turret. Proven ability to develop and interpret ideas that are resourceful, gainful and quality oriented. Experience with GibbsCAM. Ability to lift heavy objects. Knowledge of tool holders and cutting tools. Proven ability to follow instructions. Basic machining math. Excellent communication skills (English and Spanish). CNC brand names and controls: Mazatrol; Siemens SINUMERIK; Fanuc; Mitsubishi; Haas HL-4, HL-2, SL-20, VF-2, 3, 4, 5 Trunnion; Mazak 250 MS, 18 MS, 6200Y and 6300Y; Nakamura-Tome SC 250, NTY3 AND WT-150; Mori-Seiki NL 2500 NZ 1500; CNC Mills; Makino A92 and A80.

25499, CHEMICAL OPERATOR:  BS English; Veteran. Over five years experience as chemical operator producing PVC resin that is then used for extrusion. Ensure safe operating procedures are adhered to at all times. Perform lockout-tagout procedures on equipment as necessary. Operate 9 Honeywell DCS computers to ensure plant operation. Communicate daily with several departments to move railcars through plant without incident. Organize, input, and submit proper paperwork according to plant/EPA/OSHA regulations. Demonstrate excellent problem solving skills on a daily basis. Assess, input, retrieve, and interpret data to minimize customer complaints. Coordinate with storeroom personnel to obtain needed items as necessary. Safety Committee member.

25503, CHEMICAL PROCESS DESIGN ENGINEER:  BSChE. Chemical Engineer with 7 years of process design experience specializing in chemical plant expansion projects and 10 years of manufacturing experience in the elastomeric industry. Design experience includes preparation of PFDs, material and energy balances, hazardous materials inventories, P&IDs, specifications, and bid evaluations of equipment; design of hydraulic pumps; sizing of equipment; and, implementation of intelligent P&ID development software. Manufacturing experience includes leading continuous process improvements through focus on lean manufacturing, maintaining and auditing ISO 9000 quality systems, leading corrective/preventive action programs, developing elastomeric formulations, improving extrusion and injection molding processes, managing laboratory functions and testing, and facilitating cross functional cost reduction team programs.

25479, MAINTENANCE ELECTRICIAN:  20+ years of experience as a Maintenance Electrician in manufacturing. Production equipment worked on includes electrical, mechanical, and hydraulics of heat treat equipment, Mazak CNC lathes and mills, Komatsu punch presses, grinders, Blador and Magnetek VFD’s (variable frequency drives), Siemens and Mitsubishi PLC’s, using an HMI to operate and troubleshoot; ABB robotics, Servo, DC drives. Repaired 5T and under Coffing cranes. Skill set includes electrical, mechanics, welding, pipefitting, and a strong knowledge of pneumatics and hydraulics. Have installed and maintained building electrical systems. Have forklift experience.

25467, PROJECT SAFETY MANAGER:  MS and BS Occupational Safety and Health. Conduct Safety trainings and meetings. Create and revise safety policies. Assist Safety Managers with daily safety issues. Assist in preparing for third party safety audits. Assist in dividion during times of capital projects. Analyze and follow up on behavioral safety observatoins. Member of Division Safety Steering Team, Machine Guarding Champion. Communicate safety issues that arise between contractor and company. Implement employee involvement programs and track % of employee participation. Prepare and present Capital Project Safety Best Practices at companywide engineering meetings. Completed Hopewell capital project ($150M) with over 400,000 man hours in 20 days with no OSHA recordable injuries.

25484, OPERATIONS MANAGER / PROCESS ENGINEER:  BS Materials Science and Engineering; Six Sigma Green Belt certified. Core strengths include project management experience; continuous improvement, Lean manufacturing and Six Sigma toolset; quality management systems; thermoforming set-up and troubleshooting skills. Oversaw the production of thermoformed disposable containers (OPS and PET) for the food industry. Facility employed six people and used GN cut in place and Lyle thermforming equipment with roll stock. Manage and control plant operations from raw materials procurement process to finished products delivery. Increased productivity by 10% during the first year by eliminating defects, reducing product transportation, and changing plant layouts. Worked with the mold and tooling supplier on the design of 12 different tooling or cut-in-place and roll stock thermoforming machines. Applied Lean manufacturing Quick Changeover tool reducing exhange times from an hour to 15 minutes and performed 5S thermoforming set-up for cut-in-place and in-line machines.

25460, DIE / EQUIPMENT SERVICER:  AS Machine Tool Technology. Maintain the quality, breakdowns, and preventative maintenance of 9 plastic injection molds - 5 front bumper fascias and 4 rear bumper fascias, including repair of any flash, quality defects, or design changes to the bumper fascias. Design and fabrication of special tools, fixtures, and repair of existing equipment. Maintain preventative maintenance and breakdowns of 2 4400T Mitsubishi injection molding machines, 2 C02 Lasers, 3 Star takeout robots, 3 Fanuc trim cell robots, 3 FTS flame systems, one 33T DeShazo overhead crane, and the support equipment for the injection molding area. Completed Fanuc, Mitsubishi, and crane training classes, as well as Train the Trainer, RCM, and FMEA courses. Proficient Tig and Mig welder. Computer skills include Excel, Word, PowerPoint, AutoCAD, Visio, and Maximo. Injection molding press experience with Mitsubishi 4400T.

25475, DIRECTOR OF PACKAGE DEVELOPMENT & ENGINEERING:  BS Engineering; ASQ Certified Quality Engineer. Develop and engineer quality packaging for the fragrance, cosmetic and / or consumer goods industry by utilizing my broad global experience in the following dey areas: technical packaging, development, engineering, quality, and manufacturing. Created the technical packaging and quality control operations with specific written guidelines and operating procedures. Initiate value analysis of fragrance package resulting in an annual cost savings of $1.25MM. Qualified all new tools and molds at vendor facilities. Generated specifications and test methods for packaging components. Generated specifications for subcontract filling and assembly operations. Worked with in-house and outside design consultants to achieve the desired finished product. Designed and developed all new tools and molds for glass, plastic and metals with global suppliers. Products included glass containers, PP/PE caps, handles, and pumps. Other materials worked with include HDPE, LDPE, Surlyn, ABS, GPS, SAN, and PVC.

25453, KEY ACCOUNT MANAGER:  BSBA Finance. Recruited to sell rigid and flexible PVC compound in Mid-South territory (NC, SC, TN, VA, and WV). Increased sales by 28% within three years as total annual volume exceeds 43,000,000 pounds. Recognized for contributions to record-setting sales figures, territory expansion and new account development in 2013. Mid-South territory grew 11% while overall team grew 4%. Introduced sustainable products into the market and ranked as #1 account manager (out of eight) for sustainable product sales in 2012. Foster a robust, long-term network of buyers, leveraging strong listening, presentation, and closing skills to optimize sales results despite previously dominant competitor advantage. Demonstrate an unwaverying commitment to customer service, adding 17 new buying customers while maintaining permium technical service levels with existing accounts.

25481, PRODUCTION SUPERVISOR:  Direct report of 30 hourly (Operators & Maintenance) and indirect up to 25 hourly (Warehouse & Chill Department). Supervised production floor and ensured company mission statement, product at the right cost at the right time. Perform pre-shift meetings to communicate personnel changes of production schedule. Train personnel in all subjects regarding about safety, GMP, HACCP, ISO2000 and including machine operations and systems. Tracked and timed during bottle size changeovers and implemented new methods to minimize down time - Results 15% reduction in changeover time and labor time on changeovers based on before / after studies. Produced bottles from single serve to multi-serve with multiple closure options.

25483, PROCESS ENGINEER:  MS and BS Chemistry, ACS certified. Previous experience characterizing chemicals using various analytical techniques and managing a diverse team in an industrial production level laboratory where customer focus is key. Masters degree in ultrafast laser spectroscopy, fluorescence, and UV-Vis spectroscopy. Oversee day-to-day operations and troubleshooting for the chemical bagging shop. Record and manage daily and monthly quality control charts. Prior responsibilities included: Managed preparation and implementation of QMP (a project that involved strengthening the control over the quality of the raw materials received into the plant); worked on cross-functional team to ensure availability of resources for implementing the QMP program; and wrote training documents for using the QM and LIMS programs associated with QMP. Also oversaw day-to-day activities of Raw Material Quality Control laboratories. Supervised 24 laboratory analysts daily. Developed operator work instructions. Managed raw material complaints on the local plant level. Performed raw material testing in the chemical laboratory, HPLC, KF, FTIR, DSC, and other wet chemistry techniques.

25470, INDUSTRIAL / MAINTENANCE ELECTRICIAN:  Extensive experience as an electrician as well as HVAC technician within industrial, commercial, and residential trades; ability to read blueprints for fire alarms, sprinkler system, plumbing, data communications, power and lighting, security systems, HVAC systems, etc. Effective oral and written communication skills, in English and Spanish. Can work independently or as a team player. Accustomed to working in a fast-paced environment and successfully handling several responsibilities simultaneously while meeting short deadlines. 15 years experience as an electrician; 10 years as an HVAC technician; 6 years supervisory experience.

25457, DISTRICT EHS MANAGER:  BS Biology / Environmental Science. Detail-oriented individual with more than 20 years of EHS experience in diverse industries and has demonstrated added value and wants a rewarding career with growth potential and enhancement of an employer’s environmental health & safety programs/culture. Current responsibilities include Behavior Based Safety training, reporting, tracking, and managing “Near Miss” and incident reporting for over 2,200 employees and numerous contractors/subcontractors/clients comprised across 14 states. Write, review, and approve all health and safety plans; track and manage employee’s health and safety training, Worker’s Comp, on-site field activities, and disposal of hazardous waste. Manage the implementation and oversight of all corporate SOPs, client-specific safety policies ensuring effective communication and enforcement through periodic field inspections and facility audits, training and upfront involvement in project planning, staffing, and development.

Be sure to check the box(es) for the appropriate candidate(s) above, then fill in your Contact Information and click the Submit Request button.

Your Full Name: 
Your Company: 
Your Phone Number: 
Your Fax Number: 
Your E-mail Address: 

ProTech 2, Inc. P.O. Box 7173 Alexandria, VA 22307
Phone: 703-347-6872 Fax: 877-903-8427

If you have any comments about this site, please
click here to contact the webmaster.